Part Number: ADC08200 Tool/software: Hi,
Plesae review our schematic diagram that we sampling the VCM signal, and the signal is abnormal, we have no idea that how to solve this issue, please kindly advise, thanks.
Part Number: ADC08200 Hi TI expert,
Recently I choose ADC08200 to sample analog signals and outputs of 08200 are connected to an FPGA.
VA and VDR for 08200 are both set at +3.3V. Referring to 08200's datasheet in Page 6/29, its low level output is…
Hello Jim,
We already have a board with the ADC08200 device.
We have an issue with our board, once in a while we have a bad sample.
I would like to make sure that we are clear with the timing specification of the ADC08200 device.
What is the minimum…
7888.1MHz_1V_200nS_Pulsewidth_input_to ADC08200.pdf Please find the attachment for ADC output code plot (Xilinx chipscope plot), which is having spikes and ADC analog pulse input (1MHz, 200nS Pulse width, 1V input level)
Part Number: ADC08200 Hi, I am trying to build a ADC circuit using the graph which is given in the datasheet. Right now i am doing the experiment in the breadboard.
Problem 1: how to connect between digital ground and analog ground? the Figure 31…
Other Parts Discussed in Thread: ADC08200 We are using TI ADC part ADC08200 in one of the analog project (attached datasheet). Input to the ADC is analog pulse signal, digital output connected to FPGA. We are observing settling time of ADC around 90ns…
Other Parts Discussed in Thread: ADC08200 We are using TI ADC part ADC08200 in one of the analog project. Input to the ADC is analog pulse signal (pulse width of 50ns), digital output connected to FPGA.
Issue 1:
We are observing spikes in the digital…
Part Number: ADC08200 Dear all,
I am using ADC08200 in one of my project. I am giving the input data with 1KHz pulse and I am giving the samples clock 20 MHz and tried with 50MHz also. i am getting ADC out constantly FF. The output of the ADC is not…
Other Parts Discussed in Thread: ADC08200 , ADC08500 Hi,
My customer needs an IBIS model for ADC08200.
I couldn't find the IBIS model in the TI website.
If it does not exist, is there an alternative model?
Best regards, itabi
Other Parts Discussed in Thread: ADC08200 I use an ADC08200 to detection the voltage.In the following circuit,it work in 100MHz.Working current 1A.If I break the CLK foot, the current is normal, even on the CLK foot, the working current can reach 1A,…
