Other Parts Discussed in Thread: LMH6518 , ADC08D1000 Initial conditions the LMH6518 set to Low Gain mode.
The +IN of LMH6518 is connect with a DC(+2V) + Squared waveform(2Vp-p 100kHz).
The -IN of LMH6518 is connected with a DC(+2V).
The VCM is…
For completeness I'll post the same response here:
The ADC08500 is a single input ADC. To sample 6 inputs would require 6 of these devices. Did they instead mean using three of the ADC08 D 500 instead of the ADC08D1020 ? Those are pin-compatible devices…
Hi Yaita-san
During calibration, the ADC08D500 (similar for ADC08D1000, ADC08D1500, ADC08500, ADC081000 and ADC081500) LVDS DCLK output stops and the DATA outputs are static (logic 0 I believe). DCLK and DATA operation resumes when calibration is complete…
Hi Dan
I copied over the newest question from the other posting:
" >>> One last question for six inputs. Lets say I wanted reduce the sampling rate to 500 MSPS, use the ADC08500 as a drop in replacement. Could I then just use the SDR mode at 250 MHz…
Other Parts Discussed in Thread: ADC08D1000 , LMH6554 , LMH6517 , LMH6521 , THS4522 , TINA-TI Hi,
I'm working on a design consist of LMH6554 (ADC Driver) with ADC08D1000 (Ultra HS ADC). However, I realized that my signal is unable to maintain at true…
