Part Number: ADC124S051 I am planning to use ADC124S051 on ESP32-S3.
Is there any example code or arduino library available for ADC124S devices?
Thanks a lot for your response in advance!
Part Number: ADC124S051 Hi team,
we would like to know the conversion time of ADC124S051. How long will this device need from sampling date to send date through SPI?
How to calculate this spec?
BR
Brandon
Part Number: ADC124S051 Hello,
I'm using the ADC124S051 connected to an FPGA and running at the maximum 8MHz clock rate to convert 4 different signal sources in a continuous round-robin cycle. I am seeing noticeable crosstalk between the multiplexed…
Part Number: ADC124S051 Hi team,
For now, we test the ADC124S051 with a MCU on system. we could not find a way to use our ADC with high efficiency.
the reason is that we could not communciate with ADC124S051 by using interrupt. it seems that we need to…
Part Number: ADC124S051 Other Parts Discussed in Thread: CC1101 Dear specialists,
Is there somebody who can explain the following?
In the datasheet (page 10 for example) there is a text on the above: "FSAMPLE = 200 ksps to 500 ksps, FSCLK = 3.2 to 8 MHz…
Dear Team,
We are using the below part in one of our project.
In order to conduct the thermal analysis we need thermal parameter specifications.
but we did not get the thermal parameter (RθJA, RθJC, RθJB) for the below parts in respective…
Part Number: ADC124S101 Other Parts Discussed in Thread: ADC124S021 , ADC124S051 Our product uses the ADC124S021 which specifies 50 to 200 ksps. Our application utilises the ADC at 62.5 ksps, however our CEM has requested we allow for the ADC124S051 and…
Other Parts Discussed in Thread: ADC124S051 Dear specialists,
Please let me ask you two questions about ADC124S051. 1) I understand that tCSU and tCLH are the parameters to be related to the falling edge of CS and the rising edge of SCLK (page6 and…
Other Parts Discussed in Thread: ADC124S051 Dear specialists,
Please let me ask you a question about the ADC124S051. The following description is described on the data sheet page 18.
"If CS and SCLK go low within the times defined by tCSU and tCLH, …