Part Number: ADC124S101 Other Parts Discussed in Thread: ADC124S021 , ADC124S051 Our product uses the ADC124S021 which specifies 50 to 200 ksps. Our application utilises the ADC at 62.5 ksps, however our CEM has requested we allow for the ADC124S051 and…
Hello,
this device does not output the data for the selected channel in the same frame, but in the frame after. There is a one frame delay. Note that during the acquisition time is when the input voltage is sampled, this ends before the SDI data is…
Part Number: ADC124S101 Hi, In relation to the previous question, I am experiencing a similar problem due to the RC time constant being too big and my internal sampling capacitor not discharging quickly enough, hence affecting the value of my subsequent…
Part Number: ADC124S101 Hi Tom,
I also encountered the same issue when I read more than one channels sequentially using a FPGA. The results were different when compared to reading any single one channel at a time. My questions are as follows:
1) Does…
Part Number: ADC124S101 Hi，
ADC124S101，Is there going to be an automotive rating, or is there a plan to introduce an automotive rating?
It conforms to AEC-Q100 standard.
Thanks！
Part Number: ADC124S101 Hello,
I'm driving the ADC using a system that can only change the output pin states synchronously to the falling edge of the SCLK clock. The SCLK is not stopped with the #CS going high, because other devices need to be scanned…
Part Number: ADC124S101 I would like to use the evaluation software that was originally hosted for this part with the evaluation module but it cannot be found. Can I access this software somewhere?
This forum post references a link but it doesn't…
