Part Number: ADC12D1800RF Dear Sir or Madam,
there were problems with all of 10 pieces of ADC12D1800RFIUT (65W071762) we bought. 9 pieces were somehow regulated. By one of the units, the noise levels exceed the permissible values. We ask for an replacement…
Part Number: ADC12D1800RF Hi Team,
My Customer is designing with existing FPGA source to communicate to our ADC12D1800RF, but he'd like to have a simulation environment with a TI supplied HDL model that he can simulate against. Does something like this…
Part Number: ADC12D1800RF Other Parts Discussed in Thread: ADC12D1800 Customer wants to decide using ADC12D1800RF or ADC12D1800 for their project requiring 50dB dynamic range. They require SNR, SFDR plot for both devices at below frequencies for finalizing…
Part Number: ADC12D1800RF Dear Sir I had developed a board with TI ADC12D1800RFIUT, FPGA and ZBT Cypress SRAM. In the Hardware, Each ADC/SRAM is powered up by a separate LDO. While the FPGA VCCO/AUX Core Voltages are powered up by DC-DC Regulators.
Issue…
Part Number: ADC12D1800RF Hello,
WaveVision 5 does not capture the output spectrum of ADC12D1800RFRB on the external clock mode.
The software showed that the sampling rate was 0.064 MHz.
I measured the board with an external clock on May 2017, and successfully…
Part Number: ADC12D1800RF Other Parts Discussed in Thread: ADC12D1800 , Hi all,
Could you please explain the differences between ADC12D1800 and ADC12D1800RF ?
Thanks,
Mete
Part Number: ADC12D1800RF I have a design that uses the ADC12D1800RF. We are running it in DESIQ mode, at 2.3 GSps in the second Nyquist region. I’m seeing an image across ¾*Fs.
Do you have any test data that specifies would this image should…
Part Number: ADC12D1800RF Other Parts Discussed in Thread: ADC12D1600 The data sheet for some of the parts in this family list an NPR of 50 dB (if I remember correctly). How exactly did you measure this? How wide is the notch, where is the notch, at what…
