Part Number: ADC12D1800RF Other Parts Discussed in Thread: ADC12D500RF Hi
My customer is check if it is possible to get dummy units of ADC12D1800 (NXA package) to test out the assembly fixture.
As this exercise if purely mechanical in nature, it does not…
Part Number: ADC12D1800RF Hi All,
I bought a sample of ADC12D1800RFIUT/NOPB, it's marking is :
5CW0437G2
ADC12D1800RFIUT
what's the date code of my sample?
How to read TI ADC device date from the surface marking?
Other Parts Discussed in Thread: ADC12D1800RF I have several my own boards with ADC12D1800RF. Data from ADCs are captured by FPGA where I able to analyze them.Experiments were performed with sampling frequency 1000 MHz but 300 MHz and 1800 MHz have similar…
Part Number: ADC12D1800RF Other Parts Discussed in Thread: ADS4149EVM , ADC12D500RF HI, this is Jun Hee Cho.
I have some questions.
Before I ask a question
First, I will briefly explain the application we are going to develop. We want to find bio-signals…
I have a customer who is asking the following:
I'd like to sync DCLK (i & q) for four ADC12D1800RFs running at 1.8 GHz. Is it better to:
1) to use dclk_rst from an FPGA to two master ADCs with each master ADC syncing a single slave ADC or
2) use…
Other Parts Discussed in Thread: ADC12D1800RF
For our project we use the adc12d1800rf.
mode: desclkiq mode.
test signal:498MHz
input clock：1.8G
In the output spectrum,2nd , 3rd harmonic and other spurs in 804MHz are much higher compared with data in the…
Other Parts Discussed in Thread: ADC12D1800RF , ADC12D1800 Hello,
We are cyrrently using the ADC12D1800RF, and we would like to compare the data received on I channel and Q channel.
Our problem is, we observe a delay betwwsen the two channles, and have…
Other Parts Discussed in Thread: ADC12D1800RF , ADC12D1600QML-SP , ADC12D1800 HI
I have a customer who intends to use ADC12D1800RF in a satellite application, they would like to check if this part has been deployed before in space related application.
I…
Other Parts Discussed in Thread: ADC12D1800 Hello,
I am currently using the ADC12D1800 evaluation board in a project and would like to find out if I can command features like FFT and averaging without the use of the wave vision 5 software e;g with some…
