• 

  Michael Sokolsky1

  • 8 months ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: The output signal looks like clipping even when input is low (50-100mV). How to adjust the scale?

  TI Thinks Resolved

  Part Number: ADC12D1800RFRB Hello, we are trying to use ADC subsystem ADC12D1800RFRB and I have a question related to the gain or scale of the output signal. I apply a 50-100mV input pulses from the generator, I also see the output pulses of correct width...
• 

  Matthew Applegate

  • over 2 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Interface to Computer

  • Resolved

  Part Number: ADC12D1800RFRB Dear All, I need to be able to digitise an RF signal at a minimum of 1
• 

  Juan Maya

  • over 2 years ago
  • Data converters
  • Data converters forum

  RE: ADC12D1800RFRB: adc12d1800rfrb time offset between I/Q channels

  Thanks! It worked for me! Juan
• 

  Pachara Srimuk

  • over 2 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: ADC12D1800RFRB With ML-605 (Time Stamp)

  TI Thinks Resolved

  Part Number: ADC12D1800RFRB HI, I trying to capture data from ADC via ML-605. When i using Pin trigger in the TI GHz ADC the data that I captured is not capture the same time.How can I do it?. Or can I use the time stamp or not? Thank you, P.
• 

  Yoni Sher

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Use of the evaluation board as a data acquisition card

  • Resolved

  Part Number: ADC12D1800RFRB Hi, For a LIDAR application I need to record GHz resolution waveform
• 

  Edgar Antillon

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Incorrect sampling rate

  • Resolved

  Part Number: ADC12D1800RFRB Hello, We are using the ADC12D1800RFRB . Using external logic analysis
• 

  Damla Guven

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: ADC12D1800RFRB/NOPB

  TI Thinks Resolved

  Part Number: ADC12D1800RFRB Hi there, I'm working on ADC12D1800RFRB/NOPB Reference Board. The board has 4 analog inputs: VInQ+, VInQ-, VInI+ and VInI-. On the PCB, the I-channel input connectors are labelled differently from the Reference Board...
• 

  Edgar Antillon

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Bypassing the on board voltage regulators

  • Resolved

  Part Number: ADC12D1800RFRB Hello, We are using the ADC12D100RFRB. My question is: How can we
• 

  Edgar Antillon

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Output at the connector of the reference board

  TI Thinks Resolved

  Part Number: ADC12D1800RFRB Hello, We are using the ADC12D1800RFRB and have attached a board we designed in order to get the output onto an oscilloscope. We are however, having difficulty getting the bits to display, so we are assuming the output data...
• 

  Edgar Antillon

  • over 3 years ago
  • Data converters
  • Data converters forum

  ADC12D1800RFRB: Over-range for both channels when switching to external clock

  • Resolved

  Part Number: ADC12D1800RFRB Hello, We are using the ADC12D1800RFRB . When switching to an external

Didn't find what you are looking for? Post a new question.

• Ask a new question