Part Number: ADC32RF42 Other Parts Discussed in Thread: ADC32RF44 Hi,
I'd like to run ADC32rf42at 1.5GHz and 250MHz sampling rates with bit resolutions of 12 and 14 respectively. I could check the data sheet for ENOB for fs=1.5GHz;however, I couldn…
Hi DT,
KCU105 + ADC32RF44 Design firmware is compiled for maximum lane rate of 7.68 Gbps with 192MHz (x40) clock as the expected Reference clock form the ADC.
So it is recommended to use 192 MHz clock .
1. How firmware works fine for Reference…
This is the same project I downloaded from the site. For the ADC32RF44.
In the screenshot you can see the user manual, the project also coincides with the project ADC32RF44+Arria10.
Hi John,
Can you tell the lane rates you tried with 3000 Mhz clock?
KCU105 + ADC32RF44 Design firmware is compiled for maximum lane rate of 7.68 Gbps with 192MHz (x40) clock as the expected Reference clock form the ADC
Regards,
Vijay
Part Number: ADC32RF44EVM Other Parts Discussed in Thread: ADC32RF44 Hi-
We are using a ADC32RF44 EVM board on the TSW14J56 EVM host board.
We are using the supplied TI software for each board.
Are there instructions on how to set the frequency…
Hi Art,
Each ADC channel of ADC32RF42 is interleaved across 2 cores. Each ADC core can run at a maximum rate of 0.75 GSPS. So interleaving-by-2 makes each channel run at 1.5 GSPS in ADC32RF42.
Other parts from the same ADC family like ADC32RF45 and…
Hi Chi,
ADC32RF45EVM is compatible with KCU105. So it should be compatible with XCU102 as well. KCU105 + ADC32RF44 Design Frimware is available in ADC32RF45EVM product web-page ( http://www.ti.com/tool/ADC32RF45EVM )
Regards,
Vijay
Part Number: ADC32RF42 Other Parts Discussed in Thread: ADC32RF44 , ADC32RF45 , ADC32RF80 , ADC32RF82 , ADC32RF83 Good afternoon,
Are there any alternate parts that are pin compatible with this chip? I have not found reference to it but wanted to be…
Jim,
Thank you for answering my data rate and GUI/datasheet questions. That is very helpful.
Regarding the LMFS parameters, if the data rate coming from the FPGA is 1228.8Msps and I am producing 2 samples per clock cycle (2 I samples and 2 Q samples…
Part Number: ADC32RF44EVM Other Parts Discussed in Thread: ADC32RF44 Hi,
Do you know how many ADCs for the ADC chip on this board? I have seen in the datasheet of ADC32RF44, which consists of 4 ADCs.
However, on the EVM board there are 2 differential…
