Part Number: ADC34J42EVM Using ADC34J42EVM connected via USB to PC, running ADC 3000 GUI Ver 1.1., attached to TSW14J50 connected via USB to PC, running High Speed Data Converter Pro., V 5.20, No patch applied.
Input to channel #1 of ADC = 1MHz.
Setting…
Part Number: ADC34J42EVM Other Parts Discussed in Thread: TSW14J57EVM , ADS52J90EVM ADC34J42EVM web page suggests a TSW14J57EVM can be used to evaluate ADC. Upon receipt of both EVMs documentation indicates that A TSW14J50EVM is he appropriate eval to…
Part Number: ADC34J42EVM Other Parts Discussed in Thread: ADC34J42 , , LMK04828 , ADC34J43 Hi,
We need a ADC34J42 EVM, to be used with TSW14J56 EVM with the following main configuration options.
1) Three Analog Input Channels going to be used.
2…
Other Parts Discussed in Thread: ADC34J42EVM I am looking for a high speed ADC EVM.
The requirement list is as follow: (1) Can detect voltage change less than 1 mV (2) Sample rate must over 50 MHz (3) Quad-Channel (4) Max voltage = 1.8 or 2V (5) Record…
Hi Ken C
Thank you for fast reply, we need further information about the clock configuration of the ADC34J42EVM. In order to configure sampling frequency of this evaluation board, we have downloaded and used ADC3000 GUI. There are 3 types of configuration…
slau579d.pdf Leejh,
Connect a 80Msps clock (or lower) to SMA J9 with a power of at least 10dBm. See section 1.4 and figure 7 of the attached ADC3423EVM User's Guide.
Regards,
Jim
