Part Number: ADC3660 Hi TI team,
I am currently using ADC3660 and encountered an issue where the digital output code does not match the expected value.
I am using an FPGA to capture the digital output from the ADC. I have already verified the digital…
Part Number: ADC3660 Other Parts Discussed in Thread: ADC3643 Hi TI experts,
My customer is inquiring whether the ADC3660 and ADC3643 are pin-to-pin compatible.
I noticed that both devices share the same EVM User Guide, which is likely why the customer…
Part Number: ADC3660 Hi
The output data from the ADC3660 will be received by the FPGA and processed using an IIR filter.
I would like to change the NCO during operation. In this regard, I have several questions about the behavior of the ADC3660…
Part Number: ADC3660 Tool/software: hello
The following procedure is programmed from the ADC35XX EVM GUI. I am not sure why ADC3660 is sometimes working correctly and sometimes not. Please review if the procedure to ADC3660 is correct.
0x7 0x8 0x7…
Part Number: ADC3660 Hi TI Team,
We are designing a system using the ADC3660 and have a question regarding the initialization sequence and the REFBUF pin configuration.
According to the datasheet, during the initialization phase, the device requires…
Part Number: ADC3660 Other Parts Discussed in Thread: THS4551 , , THS4541 Tool/software: I am considering changing the amplifier before the ADC3660 from the THS4541 to the THS4551. If this change is made, can I keep the glitch filter constants as specified…
Part Number: ADC3660 Tool/software: We have developed a custom board with the ADC3660 and are in the process of bringing it up. I noticed the link to download the ADC35XX GUI no longer exists and the ADC3660EVM no longer has a page on TI's website (although…
Part Number: ADC3660 Other Parts Discussed in Thread: , AM5728 Tool/software: Using the same register settings, simply changing the DCLKIN frequency from 12MHz to 40.96MHz causes the data being read to change from a count of about 11000 to a count of…
Part Number: ADC3660
hello. Currently, initial board development has been tested with Xilinx Zynq and Parallel interface ADC.
We are trying to optimize using ADC3660 with the goal of developing our next product, but the interface is different from…
Part Number: ADC3660 Hi TI,
Is there any ADC3660 FPGA read logic code. We are connecting Zynq7000 with ADC3660. Xilinx Has QSPI support but they dont allow 4 wire SPI to 3 wire conversion logic. Is there any FPGA logic available with TI ?
Regards…
