Search tips
Showing 16 results View by: Thread Post Sort by

  • ADC3662EVM: Download register configuration

    TI Thinks Resolved
    Part Number: ADC3662EVM Other Parts Discussed in Thread: ADC3662 Tool/software: Hi, expert: If I set the expected use case in ADC3662EVM, Could you help tell me how to download the all the register configuration? thanks! And in addition, I noticed…
    • Answered

  • ADC3662EVM: Would you please provide only the TSW1400 capture board to enable evaluation?

    Resolved
    Part Number: ADC3662EVM Other Parts Discussed in Thread: TSWDC155EVM Tool/software: Is the TSW1400 the only capture board to be able to evaluate the ADC3662EVM? The TSW1400 is discontinued, but are there any capture boards other than the TSW1400 that…
    • Resolved

  • ADC3662EVM: Schematic Diagram

    TI Thinks Resolved
    Part Number: ADC3662EVM Other Parts Discussed in Thread: ADC3644EVM Hi, Good Day. It is regards to the forum post below. https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1109337/adc3662evm-circuit-diagram It is…

  • ADC3662EVM: Problems integrating the ADC3662EVM (firmware) in the HDSC Pro software

    Part Number: ADC3662EVM Other Parts Discussed in Thread: ADC3661 Hi Quirin, Please find below further information provided to the case: Dear Ladies and Gentlemen, We have recently acquired an ADC3662EVM and a TSW1400EVM. We have tried to put…

  • RE: ADC3662EVM: Circuit diagram

    If you are asking for the physical mini USB 2.0 port, then the connector is labeled J12 in the above schematic.

  • ADC3662EVM: ADC3662 Signal Max. Input Voltage

    TI Thinks Resolved
    Part Number: ADC3662EVM Other Parts Discussed in Thread: ADC3662 , Dear Ladies and Gentlemen, We have recently acquired an ADC3662EVM and a TSW1400EVM. We have tried to put the device into operation with the help of the userguide. We use the internal clock…
    • Answered

  • ADC3662EVM: Programming CDCE6214

    Resolved
    Part Number: ADC3662EVM Other Parts Discussed in Thread: TICSPRO-SW , , CDCE6214 , ADC3662 Can CDCE6214 in the eval board ADC3662EVM be programmed using the TICSPRO-SW through the same USB interface used to program the ADC in the eval board? Thanks, Gus …
    • Resolved
    • Answered

  • ADC3662: ADC input protection

    Resolved
    Part Number: ADC3662 Other Parts Discussed in Thread: , THS4541 Tool/software: Hi, I'm using the ADC3662 with the THS4541 as FDA like at ADC3662EVM. In the datasheet of the ADC3662 it's mentioned that protection diodes may be needed to protect the…
    • Resolved
    • Answered

  • ADC3662: Power up

    Resolved
    Part Number: ADC3662 Tool/software: Hi, the datasheet says that the REFBUF pin should be have a delay to the AVDD by 2ms: In the ADC3662EVM schematic is the REFBUF pin connected to AVDD directly via a jumper: So in my opinion there is no delay included…
    • Resolved
    • Answered

  • TSWDC155EVM: Is there any software that can support this?

    Resolved
    Part Number: TSWDC155EVM Other Parts Discussed in Thread: ADC3662EVM Tool/software: I am planning to evaluate with ADC3662EVM + TSWDC155EVM, but is https://www.ti.com/tool/DATACONVERTERPRO-SW?keyMatch=High-speed%20data%20converter%20pro%20software …
    • Resolved

Didn't find what you are looking for? Post a new question.