Part Number: ADC5140EVM-PDK Other Parts Discussed in Thread: TEST hi,sir
For the above test path, the IIS output of ADC5140 is master and synchronous clock data is sent to AP.
but found the board IIS pin ,have no waveform,i think ,there is ADC5140 config…
Part Number: ADC5140EVM-PDK Other Parts Discussed in Thread: TEST , TLV320ADC5140 hi sir,
with ADC5140 EVM,we wanna use ap(AudioPrecison) measurements by adc path,
for example,audio input and output,how can we use the GUI testtool with ap??
Part Number: ADC5140EVM-PDK Other Parts Discussed in Thread: TEST hi sir,
with ap test,adc5140 board and ap about MCLK BCLK FRAME CLK is ok,BUT no data in CODEC DOUT pin
i check the gui config output enable,and input ended single signal with CODEC IN1P…
Part Number: ADC5140EVM-PDK Other Parts Discussed in Thread: TEST hi sir
when i test analog differ signal 1channel with IIS 16bit,
DRE enable: the SNR=110db
DRE disable:SNR=108db
so,when DRE enable and disable,there is no high effect ???
How can I…
Part Number: ADC5140EVM-PDK Can the EVM of ADCx140EVM-PDK can get the analogue Mic and Digital MEMS mic data to the Windows Laptop through USB together? I am trying to get the raw mic(s) data for a headset product for the post algrithom development. If…
Hello Sanjay!
I don't have anything drawn up - but it is two of your ADC5140EVM-PDK boards (DC087 A) boards. They are wired exactly as shown in figure 9 in the app note : Multiple TLV320ADCx140 Devices With Shared TDM and I2C Bus. Although instead of…
Eric,
Just in case you did not find it, there is a link to request the software GUI on this page: https://www.ti.com/tool/ADC5140EVM-PDK The software is part of PurePath Console 3.
Part Number: TLV320ADC3140 Other Parts Discussed in Thread: PCM1840 , ADC5140EVM-PDK , ADC3140EVM-PDK Hello,
Finally our customer get TLV320ADC5140EVM and PPC3 instead of PCM1840 EVM for 96KHz TDM master mode.
As attached, PPC3 parameter setting is shown…
