Part Number: ADS1013-Q1 Hi Team,
My customer would like to calculate the maximum amount of error that can be estimated but there is no internal ref spec of this device in the datasheet and they could not do that.
Do you have any data regarding its internal…
Part Number: ADS1013-Q1 Other Parts Discussed in Thread: ADS1014-Q1 , ADS1013 , ADS1014 Hi team,
Can you please answer the following question?
Is ADS1013-Q1 available only up to 2.048V with single-ended input?
To measure 3.3V input, can ADS1013-Q1 be replaced…
Part Number: ADS1013-Q1 Other Parts Discussed in Thread: ADS1015 , ADS1013 , ADS1014 Hi Sir,
Ads1013-q1, it is a one channel device, but my customer connect AIN0 to one sensing Voltage while AIN1 to another sensing voltage.
On the spec, there is a register…
Part Number: ADS1013-Q1 Hi TI-team
My customer want to use the ADS1013-Q1 as a single-ended input.
1. Connect AIN1 to GND. 2.The resolution is 0 V to 2.048 V at voltage level for 12 bits, and 2048 to 4095 for AD value. (Half the range of the differential…
Part Number: ADS1013-Q1 Hi HI-Team
In my recognition that FSR is fixed at ± 2.048 V regardless of the VDD voltage. If it it correct, the error of the VDD voltage does not affect the error of AD conversion. Is it correct ?
Best Regards, Koji Haya…
Thanks for your kind reply.
My customer has some additional questions as following.
1. What's the reference voltage of ADS1015-Q1 when using VDD=3.3V?
2. What's the tolerance of the reference voltage if the VDD range is 3.2V ~ 3.4V?…
Thank you for your query.
If the device is in continuous-conversion mode, the change in the MUX occurs after the current conversion is completed, and does not change immediately after changing the register. You can use the RDY pin to provide…
Nagai-san, Thank you for your query.
The ADS1018 uses a switched capacitor input stage as shown in "Figure 9. Simplified Analog Input Circuit" of the "Analog Inputs" section in the datasheet.
The input sampling capacitance is a function…