Part Number: ADS1014-Q1 Tool/software: Regarding the characteristics of the Digital filter, please let me know the Pass band, stop band, attenation ,Thank you
Part Number: ADS1014-Q1 Tool/software: We are using ADS1014BQDGSRQ1 now. Here are our settings: VDD=5V, INP=1.5V~3.6V, INN=GND, FSR=±4.096 V In this case, the LSB=2mV. We measured that there is a ripple of about 25mV in INP. Will this have any effect…
Part Number: ADS1014-Q1 Tool/software: Hello team,
Customer met some problems when design ADS1014-Q1, there are some questions need to check with you:
1. What is the concrete range of half the sampling frequency of the ADC;
2. What is the meaning of Unwanted…
Part Number: ADS1014-Q1 Other Parts Discussed in Thread: ADS1114-Q1 , Tool/software: Hi team,
My customer want to know resolution. Here is their settings: VDD=5V, INP=2.5V+/-1.5V, INN=GND, FSR=+/-2.048V(default)
In their use case, I think they can't read…
Part Number: ADS1014-Q1 Tool/software: Hello team,
Good day.
Customer need INL parameters when FSR=±4.096V, but there is only FSR=±2.048V in our datasheet, could you share the information?
Thanks.
Part Number: ADS1014-Q1 Other Parts Discussed in Thread: ADS1014 , , ADS1114-Q1 , ADS1015
Hi Team,
Can you please help with the question below?
On the datasheet Page 10/44
1. Why the 1-MHz internal oscillator has to be divided by the factor of 4? Is it…
Part Number: ADS1014-Q1 Hi TI,
Is it possible for me to use different voltage value for Vdd and SDA, SCL pull high voltage? Eg: Vdd is 5V and SDA, SCL is pull high to 3.3V.
Thank you.
Best regards,
Fariz
Part Number: ADS1014-Q1 Other Parts Discussed in Thread: ADS1014 , ADS1013 Hello TI experts,
My customer now designs temp/humidity sensor for car. and they considers ADS1014 for ADC.
The condition is as below;
1. VDD : 5.1V (actual voltage from DCDC)
2…
Part Number: ADS1014-Q1 Other Parts Discussed in Thread: ADS1014 My reset understanding as below is OK?
1.when power up, ADS1014 is automadically configuerd by default setting.
2.to use ADS1014, I have to send reset command(06h) by I2C.
3.after 2. ADS1014…