Part Number: ADS1112 Hi,
Good Day.
The datasheet, page 6, it shows how to calculate output codes for a given PGA gain, number of bits, and differential input (Vin+, Vin-).
What I wish to do, is use single-ended conversion, and calculate the output…
Part Number: ADS1112 Hi Team,
There is a delay when reading two channels at the same time through I2C in the driver, and it may appear that the value of the first channel is obtained by reading the value of the second channel.
SW code is showed as below…
Part Number: ADS1112 Hi,
Shall I ground exposed pad on DCR case or it should be left floating?
Can't see any information on the datasheet.
part number: ADS1112IDRC
Regards
Krzysztof
Part Number: ADS1112 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of ADS1112IDGST…
Part Number: ADS1112 I am using ADS1112 in a proven design. I have one sample of ADS1112 that goes into a failure mode where all channels read as zero with respect to AIN3. Power cycling resolves the failure. It happened twice. I have swapped the part…
Part Number: ADS1112 Other Parts Discussed in Thread: ADS1261 , ADS122C04 , ADS124S08 Our customer has a product that needs weight measurement (30 ton load scale measurement scheme). Eight Bridge weighbridge sensors need to be connected, and each circuit…
Part Number: ADS1112 Part#: ADS1112IDRCT;Urgent!!
Does anyone know the translation of the marking on this device?
First Line=Package Marking
Second Line=?
Third Line=?
Michael,
The thermal information for the ADS1112 DRC package came through and here are the results:
Theta JA-High K - 50.4 Theta JC, top - 64.1 Theta JB - 23.4 Psi JT - 2.8 Psi JB - 23.4 Theta JC, bottom - 6.3
Joseph Wu
Part Number: ADS112C04 Other Parts Discussed in Thread: ADS1112 , , ADS1115 Hi,
Our customer is using ADS1112 now.
They have a plan to change from ADS1112 to ADS112C04.
I have some questions like below.
1. Is there no issue?
2. Could you guide firmware…
Part Number: ADS1112 Hi all I am using ADS1112 in 16bit, 15sps, single mode. I am trying to find output code across Ain0 and Ain3 with Ain0 reading from a constant voltage source (in my case grounded in order to test the chip) and Ain3 witch is grounded…
