Part Number: ADS1118EVM Other Parts Discussed in Thread: ADS1118 , ADS1115 Hi,
I am trying to get a PIC18F87J90 controller on a Microchip development board to drive ADS1118EVM with SPI. The issue is that I do not see it convert after the configuration…
Part Number: ADS1118EVM Other Parts Discussed in Thread: ADS1118 Tool/software: My device connects fine, when I attempt to capture data on the correct channel (I tried all of them just in case) the time domain window doesn't have any lines connecting…
Part Number: ADS1118EVM Hi,
I wanted to know if I can apply any external voltage to Ain0 and Ain1 points in the ADS1118EVM and to check the ADC output voltage. I have used it in Temperature sensor mode and also by using K-thermocouple.
Now instead…
Part Number: ADS1118EVM Other Parts Discussed in Thread: ADS1118 , HDC2080
Hi,
I have the ADS1118EVM and it is hooked up to the USB dongle and has a K type sensor attached (the sensor that came with the EVM). The data coming back seems to be railed…
Part Number: ADS1118EVM Hello TI experts,
My customer got ADS1118EVM and tried to test, but it cannot connect to PC.
1. when i connect EVM to PC with USB cable, 5 LEDs turn on and off four times in turn, and nothing happens.
(in user guide, D1 and…
Part Number: ADS1118EVM Other Parts Discussed in Thread: ADS1018EVM , ADS1118 Hi,
ordered EVM has different design from uploaded design in Ti.com.
Could you provide proper EVM guide for below picture?
Part Number: ADS1118EVM Hello TI experts,
Last time I asked about the connection of ADS1118EVM to PC ;
https://e2e.ti.com/support/data-converters/f/data-converters-forum/990020/ads1118evm-cannot-connect-to-pc
finally I could connect to PC with your…
Part Number: ADS1118EVM Hi,
I received the ADS1118EVM, but it does not respond to temperature variations through the software provided by you.
The lights on or off the unit work properly. Temperature at cold junction apparently works.
However the…
Part Number: ADS1118EVM Other Parts Discussed in Thread: ADS1118 , Hello,
I would like to try and speed up the monitor inorder to see a sin curve, in order to do that I need an upgraded driver for the chip.
What driver would be recommened for this…
Jim,
In the ADS1118EVM software, the GUI alternates between temperature readings and ADC readings. The temperature sensor is enabled in the ADC with bit 4 of the configuration register.
There will always be a delay between programming the configuration…
