Part Number: ADS114S06B Hi,
I have selected ADS114S06B 16 bit ADC for my application. My requirement is to read temperature from 0 deg centigrade to 60 deg centigrade with a accuracy 0.005 degrees and 1% tolerance . As it is 16 bit ADC, and I want to…
Part Number: ADS114S06B Hi ,
1. i was working with ADS114S06B and it is interfaced to Raspberry pi using spi interface. i was to unable to read any data from ADS114S06B , i was in confusion that whether the device is working or not. can you please suggest…
Part Number: ADS114S06B Other Parts Discussed in Thread: ADS114S06 , ADS114S08B Dear Sir/Madam,
We have built a custom board using ADS114S06BIPBS to read PT1000 sensors. But we are having issues with SPI communication. The signal line from the MCU to ADS114S06…
Part Number: ADS114S06B We are using mentioned device in one of our projects. It is interfaced with SC20. I request for the schematic review. Schematic is attached.
Control_Board.pdf
Part Number: ADS114S06B Other Parts Discussed in Thread: ADS114S06 Hi expert,
1. Please help review schematic of ADS114S06B.
2. Could I directly use this schematic for ADS114S06?
6735.schematic.pdf
Regards and thanks.
Jiandong
Part Number: ADS114S06B Hello,
I've seen where a ferrite bead is put in line with the power shared with digital power supplies to feed analog components. Where can I learn more about this practice and some of the tradeoffs and tuning practices? In…
Part Number: ADS114S06B We are using the ADS114S06B in our system. We have chosen this chip for it's 16 bit capabilities. This would project out input range (+-32.768V) exactly as 1mV/bit.
To keep our power supplies simple, we took the input voltage…
Part Number: ADS114S06B Hello,
I am using ADS114S06B in one of our project. I am not getting proper data from the registers including device id. My program sequence is as follows :
SPI Settings : Baud Rate - 20Mbits/s,8 Bit data format, MSB first, CPOL…
Part Number: ADS114S06B Hello E2E,
I am using the ADS114S06B to support two separate sensors at a time. I will have to ping-pong between the two sensors during operation. This will entail switching IDAC connections (and current value), external reference…
Part Number: ADS114S06B I want to detect over range if the analog input goes about Internal reference voltage 2.5V?
Is there any register or indication for this? If no then how detect the over range?