Part Number: ADS1242 Other Parts Discussed in Thread: ADS1231 , ADS1220 , I am make a data acquisition from the devise,
the application is weight scale, with wheatstone bridge,
in steady state the data I am getting is pretty inaccurate, when using…
Part Number: ADS1242
Hello,
I am trying to read the data from ADS1242 registers via SPI
unfortunately device not responding for any register,
DRDY is always down,
What I am doing wrong ?
Part Number: ADS1242 Other Parts Discussed in Thread: ADS124S06 Hello;
We are redesigning a design with a ADS1242IPWT in it. Can you tell me something about its product longevity?
Thanks in advance;
Regards;
Pieter
Part Number: ADS1242 Other Parts Discussed in Thread: ADS1220 , ADS124S06 Hi Teams
This is Gabriel Xu from South China OEM team. Nice to meet you.
My customer is using ADS1242 in a new project and they want to convert four single-ended signals.
…
Part Number: ADS1242 Other Parts Discussed in Thread: ADS1220 , ADS1248 Tool/software: Code Composer Studio Need support for
-Hardware reference design schematic.
-Software code for average value Analog to Digital (ADC) ADS1242
Thanks for support…
Other Parts Discussed in Thread: ADS1242 Hi,
I am using ads1242 interfaced with tms320f2805.
Vdd = 3.5 v, vref- = 0V and Vref+ = 2.5v
Gain is set to 1, RANGE = 1, data rate = 15kHz
Mux register is set to 0x01(AIN0 is positive and AIN1 is negative…
Other Parts Discussed in Thread: ADS1242 , ADS1256 Hello,
We are experiencing some problems with crystals stopping after a while when used with an ADS1242 ADC. In some cases, failure can occur after over a year of continuous operation whereas on other…
Hi Bob,
Thank you for your reply.
I am using ADS1242 in the attached Pt100 measurement circuit.
I have three differential input, one for PT100 and 2 to calibration with resistence to 0 ohm and 130ohm
1)AIN0 101mv and AIN1 44mv (for resistence…
Danny,
This looks correct. The update for DRDY will pulse even if in STOPC mode. If you read the data, DRDY should go back high until the next set of data becomes available at which time it will go low again.
In short, DRDY will go high when you…
Nigel,
This is strange that the data points are so similar in appearance. Again, I think this is related to the reference. First I would take more samples to see if the noise is oscillating or has some specific pattern. You would probably benefit if…
