Other Parts Discussed in Thread: ADS1278-SP , ADS1278 , OPA2333 , LMP2012QML-SP Hi there,
we are planning to use the ADS1278-SP in High-Resolution with flck=20MHz so fmod=5MHz (Tsample=200ns). With reference to Figure 63-64 on page 30 of the datasheet (SBAS937B…
Part Number: ADS1278 Tool/software: From this table in the datasheet, if Vref is 2.5V, I calculated that the LSB should be 2.5 / (2^23 - 1) = 0.298 uV
Can anyone confirm if this is correct?
Part Number: ADS1278 Other Parts Discussed in Thread: INA851 , ADS127L11 , ADS127L18 , Tool/software: Dear TI,
Can you advise please? We are using the INA851RGT fully differential instrumentation amplifier (INAMP) to drive the ADS1278MPAPTEP Differential…
Part Number: ADS1278-SP Tool/software: Hello,
Is there a sequencing required for VREFP pin if external source is used (2.5V dedicated precision reference source).
In what order should power on VREFP come up in reference to DVDD and AVDD?
Thanks,
Sam…
Part Number: ADS1278-SP Tool/software: If for the ADS1278WHFQ-MLS device, only has applied power to AVDD, VREFEN, VREFP and NOT DVDD, IOVDD is there risk for damage or overstress of the component?
Powered Domains
Powered Inputs
Unpowered Do…
Part Number: ADS1278 Tool/software: Hi team,
Project Context: We are utilizing the ADS1278 ADC in our project to acquire data from multiple channels. The input signal provided to the channels is directly from our IC, operating at a frequency of 2 kHz…
Part Number: ADS1278 Tool/software: Hello,
If for the ADS1278WHFQ-MLS device, only has applied power to AVDD, VREFEN, VREFP and NOT DVDD, IOVDD is there risk for damage or overstress of the component?
Powered Domains
Powered Inputs
Unpowered…
Part Number: ADS1278-SP Tool/software: ADS1278HFQ/EM: when will this EM version of this ADC be available again? Looks like only the flight version is available now.
Part Number: ADS1278 Tool/software: Hi team,
I am working the project of 8 channel DAQ for using the ADS1278.
Configure the high speed mode for sampling at 65536SPS_FCLK_16.777MHZ.
Next enable the 4 channel and Using the spi protocol for read the …
Part Number: ADS1278 Tool/software: Hello,
I am designing a PCB that uses ADS1278 ADCs, controlled by an FPGA. We may be facing delays in procurement of the board with the FPGA on it and were looking for another way to read the data from the ADCs so…
