Part Number: ADS1278-SP Tool/software: Hello everyone!
I have a doubt about the power consumption of the part at different clock frequencies. In the datsheet power consumption is detailed at a fclk of 27MHz. I plan on running the ADC at lower frequencies…
Part Number: ADS1278EVM-PDK Other Parts Discussed in Thread: ADS1278 Tool/software: Hello everyone,
We are using an older ads1278 EVM to prototype our system and have set up the power supply as follows:
Power Sources: Two separate dual-channel…
Part Number: ADS1278 Tool/software:
Hi Support Team,
In ADS1278 datasheet the timing sequence is,
But we are occuring, when DRDY falling low. In 60ns SCLK should transfer the clock. But it took times upto 532ns. we need to reduce this timing…
Part Number: ADS1278
Tool/software:
Hi suppor team,
We are experiencing an issue with the transmission of the 24-bit clock in our controller. The current setup introduces a delay after every 8 clock pulses. Specifically, there is a delay between…
Part Number: ADS1278-SP Tool/software: If for the ADS1278WHFQ-MLS device, only has applied power to AVDD, VREFEN, VREFP and NOT DVDD, IOVDD is there risk for damage or overstress of the component?
Powered Domains
Powered Inputs
…
Part Number: ADS1278 It appears from the datasheet that the ADS1278 has a metal bottom, it that correct? Will running traces underneath the component be a probelm?
Part Number: ADS1278 Hi team,
I am working in the project of ADC. In this project using ADS1278.l have some queries about the reference voltage section.
Configering the Single ended reference voltage VRefP 2.5V and VRefN GND .lower voltage 0,and Higher…
Part Number: ADS1278 HI team ,
I am Working in the project of data acquisition system so we need 8 channel input in this case we choose the ADS1278. To configer the ADS1278 through the SPI protocol,
we are configer the configeration through the I…
Other Parts Discussed in Thread: ADS1278-SP , ADS1278 , OPA2333 , LMP2012QML-SP Hi there,
we are planning to use the ADS1278-SP in High-Resolution with flck=20MHz so fmod=5MHz (Tsample=200ns). With reference to Figure 63-64 on page 30 of the datasheet…
Part Number: ADS1278-SP Other Parts Discussed in Thread: ADS1278 Tool/software: Hi team,
Please let me confirm below just in case.
Could you tell whether there are any time restrictions that they need to follow for the power sequence? There are…
