Part Number: ADS127L01 Hi, in the datasheet page24, it sounds the ENOB equation is NOT correct, please help double check how to this ENOB calculation in equation 2, thanks.
Jay
Part Number: ADS127L01 Other Parts Discussed in Thread: ADS127L11
Hi TINA TI experts,
Do you have any idea in how to connect ADS127L01 with STM32 via SPI in order to read data converted by ADC?
Is there any library of this ADC that can help me to…
Part Number: ADS127L01 Other Parts Discussed in Thread: TINA-TI , ADS127L11 Hi TI experts,
I want to design an ADS based on ADS127L01 but can’t find the schematic of this component on TINA TI software. If someone has this schematic, don’t hesitate to…
Part Number: ADS127L01
In the datasheet of ADS127L01 part 7.1 noise performance: the equation is:
ENOB = In (2 x VREF / VRMS_noise) / In (2)
But isn't it
Effective resolution = In (2 x VREF / VRMS_noise) / In (2)?
ENOB is different from effective…
Part Number: ADS127L01 Other Parts Discussed in Thread: ISO6762 , ADS127L11 , ISO6741 Hi Team,
My customer who is doing motor drivers and they are interested in using ADS127L01, They think that the ENOB and SNR are good for their application,
However…
Part Number: ADS127L01 Hi,
the datasheet says that offset- and gain-calibration is possible in the SPI interface mode.
Can I also configure this with SPI, and then switch the ADC to Frame Sync interface mode for the actual sampling?
I'm asking because…
Part Number: ADS127L01 Other Parts Discussed in Thread: ADS124S08 , ADS1261 , , ADS127L11 , , THS4551 We are designing a strain gauge based sensing circuit and need to make both static (signal unchanged or slowly changing around 30-60 seconds) and dynamic…
Part Number: ADS127L01 Hi Gent.,
Happy Christmas Holiday!
May I know how to get the 1.34 µVRMS of input-referred noise in ADS127L01 d/s? thanks.
best regards,
Steven
Part Number: ADS127L01 Hi team,
here is a confusing item want to confirm with you:
if the OSR pin setting is the only way to adjust it? notice that datasheet only mentioned OSR pin setting as following:
any possible way to set it by SPI register…
Part Number: ADS127L01 Hi,
we are using the ADC ADS127L01 in the SPI mode, we have a variable modulator clock (CLK) in our application to cover various sampling speeds. I have a few questions regarding the SCLK signal. In the datasheet there is a requirement…
