The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: ADS127L21EVM-PDK Tool/software: Dear Texas Instruments Support,
We are currently using the ADS127L21EVM-PDK board from Texas Instruments, along with the PHI controller , for a PC-based automated data acquisition project. After a thorough…
Part Number: ADS127L21EVM-PDK Other Parts Discussed in Thread: ADS127L21 Tool/software: Dear support,
We are going to use ADS127L21 in our ongoing project. The fastest option for our application is to use the "TI hardware" (Eval board + PHI EVM…
Part Number: ADS127L21EVM-PDK Other Parts Discussed in Thread: ADS127L21 Tool/software: Hi,
In a related question, I was informed that you will release C code to control the EVM board programmatically by the end of the year (2024).
What's the status on…
Part Number: ADS127L21 Tool/software: Hello,
We recently ordered ADS127L21EVM-PDK to operates urgent measurement of THD on our system. As startup we thought it is a good idea to go with this evaluation board to make our measurement. Unfortunately, we…
Part Number: ADS127L21EVM-PDK Other Parts Discussed in Thread: ADS127L11 , ADS127L21 Tool/software: I would like to evaluate a custom driver I have written for ADS127L21 on the basis of example code for ADS127L11. Some of the registers are significantly…
Part Number: ADS127L21EVM-PDK Other Parts Discussed in Thread: ADS127L21 , ADS127L11 Tool/software: Hello,
I ordered one of these boards through my company. While your software seems nice, I would like to capture data continuously, one data batch after…
Part Number: ADS127L21EVM-PDK Other Parts Discussed in Thread: ADS127L21 , ADS127L11EVM-PDK , ADS1278 I’m trying to install the GUI for the ADS127L21EVM-PDK evaluation board but I’m having problems with the USB driver installation which gives an error when…
Hello Onur,
Welcome to the TI E2E community.
We do not have VHDL/Verilog behavioral models for TI Precision ADC products. For development, we offer example code, IBIS and SPICE models, and full evaluation boards.
https://www.ti.com/tool/download/ADS127L11…
Hello Theo,
The SINC filters will have too much attenuation (>10dB) at 20Hz if set to filter 50/60Hz. The best approach is likely to use a custom FIR filter with a corner frequency set a little higher than 20Hz. Attached is custom filter designed with…
