Thanks you for the information but it seems that this is not pertinent to attaching external ADC to a C28346. Application will use multiple external 24b ADC. ADC are accessed through serial communications like ADS1281.
HC
Other Parts Discussed in Thread: LM5030 , ADS1281 Dear all,
I am developing a specific power supply based on LM5030 and I would appreciate some help.
The supply is a push-pull configuration, ~non-isolated, 9-16VDC nominal (8-18V "should work") input…
Hello Gaute,
Setting the SYNC, RESET and PWDN high should be the default condition.
When using the ADS1282EVM M0, M1, MCLK are the modulator signals when running in modulator mode; and on normal operation, they should be tied. The EVM has them set…
Other Parts Discussed in Thread: ADS1282 Dear sir,
I used +5V singl power supply and the VREFP == 5V VREFN == AGND.
When I set the ads1282 PGA==8 as below,but it seems not work.
command_stopread(); //stop read continous read to write Register…
Other Parts Discussed in Thread: ADS1291 Hi i am using alitium to design my pcb. i am searching for the suitable antennas for the footprints which are compatible with ADS1291. Anyone who has previously used or can have some idea about this??
Other Parts Discussed in Thread: ADCPRO I am trying to use the ADS1281EVM board with the MMB0 that I have from an ADS1274EVM-PDK. I downloaded the ADS1281EVM software module but when I try to load it it just gives me a "DSP not ready" message in ADCPro…
Other Parts Discussed in Thread: ADS1278 , ADS1274
Hello;
We have a design in which one ADS1278 (actually they are two working in parallel because we need up to 10 channels with 24-bit resolution, but in this case it does not matter) work with an…
Other Parts Discussed in Thread: LMP90100 Hello,
I am using lmp90100 AFC. In this data sheet they mentioned detection of open and short circuit is there.
But the procedure they didn't mentioned.
So please can anybody tell me, how to how to find…
