Part Number: ADS131M06 Other Parts Discussed in Thread: ADS131M08EVM , AM2432
Hi Expert,
I am reading the datasheet of ADS131M06. I found the statement below regarding SPI clock and the modulator sampling clock.
8.3.5 Clocking and Power Modes The master…
Part Number: ADS131M06 Other Parts Discussed in Thread: TEST I appear to be having a problem setting up an ADS131M06. I can read back the registers I set but there appears to be no difference in the output.
I've checked the signal with an oscilloscope…
Part Number: ADS131M06 Other Parts Discussed in Thread: ALLIGATOR Hello
See the figures bellow:
Figure 1: My circuit project - analog Front-End (Current).
Figure 2: Texas project - - analog Front-End (Current).
Figure 3: ADS131M06 6-Channel.
In Figure…
Part Number: AM2432 Other Parts Discussed in Thread: ADS131M06 ,
Hi Expert,
When an external ADC chipset(ADS131M06) is connected to AM2432, this external ADC chipset requires an external master clock in the range 4MHz~10MHz. I plan to use the generated clock…
Hello Eddie,
Just to confirm, I couldn't find any inherent issues with internal test signal. Let me know the results of tying the inputs to GND to see if the gains scale as expected.
Thanks,
-Cole
The SCKL from the LPAM243 is just broken somehow. I don't have another board to tell if its a problem with my board or with their design, but the waveform is properly scaled at 1MHz, just not the 25MHz needed for this ADC. I am currently working on getting…
Part Number: ADS131M06 Hi Team, May I ask for help? Our customer have a concern: Would you tell me please if I must match the impedance of the ADC input which can be ( 1M or 330KOhms ) to the voltage divider impedance? I hope you can help as clarify the…
Part Number: ADS131M06 Other Parts Discussed in Thread: ADS124S08 Hello Guys,
Good day.
Our customer is designing a board that requires 12 ADC channels, 6 are differential and 6 are single ended. Can the ADS131M06 be configured to support the 6 single…
Part Number: ADS131M06 Hi Ryan,
Sorry i was away for Long time and busy with other things.
Actually i am sensing AC Voltage of 540V with upper resistor of 900K and Bottom resistor of 2K.
so at ADC i am getting 1.2V when 540V is applied.
For continuous…
Part Number: ADS131M06 Hi,
Can you please help me in understanding noise level lost in conversions?
I wanted to measure 300VAC with the resolution of 1V
how i will make sure that with this ADC, I will achieve this resolution.
Regards,
Deepak
