Part Number: ADS4128 HI SIR
I apply the power for the ADS4128, accroding to data sheet , i will get the 0.95v in PIN18
but I can't get any voltage in the pin, please advise it,thanks
Part Number: ADS4128 Hi
What does the following specification mean in section 7.3 of the datasheet?
If I have frequency components above 400 MHz, can I use full input range of 2Vpp? The above specification seems to suggest "no". If so, what are the downsides…
Part Number: ADS4128 Hi Team,
My customer is using ADS4128 and find something strange.
The noise of ADS4128 is very big when there has no input signal (40dB); the 4 LSB has random data but not LVDS data.
The noise of ADS4128 is much smaller when there…
Part Number: ADS4128 Other Parts Discussed in Thread: THS4541 Hi,
We need to digitize a signal using an ADS4128 @ 200MSPS for a battery powered instrument.
The source impedance will be 50Ohms single ended. We need to filter this signal with the following…
Part Number: ADS4128 Other Parts Discussed in Thread: TIDA-00942 , ADS4122 Hi,
can we use ADS4128 with ti processors.if ok. please suggest any ti processor part numbers.
Thanks,
Ashok
Part Number: ADS4128 Hi,
Either i found a mistake in the datasheet, or i have something wrong in my system, but all is leading me to believe there is a mistake in the datasheet.
The datasheet states that the registers 0x3F and 0x40 respectivement mean…
Part Number: ADS4128 Other Parts Discussed in Thread: THS4541 , THS4509 , TSW2170EVM , TSW2110EVM Hello,
I have an application with an ADS4128 driven by an AFE using THS4541 and THS4509 op amps.
I want to be able to reproduce the setup used in figure 8 of…
Part Number: ADS4128 Other Parts Discussed in Thread: ADS4226 , ADS4229 , ADS4249 Team,
My customer(China customer) recently is planning to kick off project for optical temperature measure, they want to choose 12bit, 200Msps ADC. It seems ADS4128 will be…
Part Number: ADS5560 Other Parts Discussed in Thread: ADS4149 , ADS4128 Hi Team,
We are using ADS5560, ADS4128, ADS4149 ADC's in our design. We used 24MHz as sampling clock. While testing we see the clock harmonics are present with analog input signal…