Part Number: ADS4222EVM Hi Team,
We would like to ask your help regarding the customer's inquiry below.
I would like to convert the single-ended ports of ADS4222EVM to the differential ones. I attached the modified schematic. Could you please confirm…
Part Number: ADS4222EVM Other Parts Discussed in Thread: ADS4222 Hi Experts, May I ask if you can please provide the schematic of the ADS4222EVM (LVDS) board?
Our customer downloaded the schematic of ADS4222EVM from here ( ADS42XX_58C28EVM DesignPkg (Rev. B…
Part Number: DAC5662 Other Parts Discussed in Thread: ADS4225 , , ADS4222EVM Tool/software: Hi TI supporter, I have project that use x4 ADS4225 12bits 125Msps and DAC5662 12bits 275Msps. I saw the ADS4222EVM and DAC5662EVM but don't see the connection to FPGA…
Part Number: ADS4222 Dear team,
I have three questions about using ADS4222EVM, could you please help on those questions? Thank you.
1. I used ADS4222EVM+ TWS1405EVM and used HSDC pro to capture input signal.
When I feed:
Input Amp:-50dBm; Freq:1MHz at…
Part Number: ADS4222EVM Using the TSW1400 GUI I'm running the Test Procedure per the TSW1400 user manual. The jumper configuration on the ADS4222EVM
is per the user manual. I'm using RF signal generators inputting a 50MHz sinewave clock (0dBm) and…
Part Number: ADS4222EVM Other Parts Discussed in Thread: SN74AVC16T245 , ADS4222 , FMC-ADC-ADAPTER As titled, I want to test ADS4222EVM without TSW1400.
I've check the jumper settings and all of them are in the correct (default) positions.
But I'm not…
Other Parts Discussed in Thread: ADS4222EVM , TSW2110EVM Hello, I've purchased ADS4222EVM (REV C) and I'm trying to use it (CMOS, I've removed the necessary resistors and plugged in U12 and U13).
When I connected it to my PC the GUI software…
Other Parts Discussed in Thread: THS4541 , ADS4222EVM , THS4509 Hi,
I have few questions about ADS42XXEVM board:
1.What's the input voltage range? Can we have up to 80V?
2.Can this module handle both AC & DC coupling?
3.It supports Configurable…
I would design your circuit to include an oscillator option, a clock jitter cleaner option, a SMA option and a FPGA option. You would start with no populating the clock cleaner and oscillator and have default connection use the FPGA. The SMA option would…
Part Number: TSW1405EVM Hi Team,
Our customer would like to use replace the TSW1405EVM with Artix-7 FPGA. According to our customer,
I bought an ADS4222EVM board+TSW1405EVM. I tested the EMVs, and they worked very well. Now, I would like to replace TSW1405EVM…
