Hi Richard,
Here are the links to the rev B schematics.
/cfs-file/__key/communityserver-discussions-components-files/73/3858.2251.ADS5263EVM_5F00_REV_5F00_B_5F00_SCH.pdf
and the BOM:
/cfs-file/__key/communityserver-discussions-components-files…
Hello Anton,
How are you?
Thanks for using our ADS5263EVM.
To separate AGND and DGND, our ADS5263EVM uses 2nd layer as the ground plane
and split it into left (as AGND) and right (as DGND) portions except at the center part of the plane (connected…
Hi Clayton
The ADS5263 is the ADC that is closest to meeting the described performance needs.
It has a high SNR 18-bit data output mode where the 16-bit data is further processed using decimation filters.
You will need to combine this ADC with a suitable…
Part Number: ADC3422EVM Hi all,
we bought three module ADC 3422EVM, ADS5263EVM, ADC3442EVM, also with TSW1400 motherboard.
ADC 3422EVM works normally with TSW1400, then we would like to connect ADC 3422EVM with its J13 port,
bur we didn't find more…
Hello,
I am using Virtexn 6 evaluation kit along with the FMC-ADC adapter and ADS5263EVM from texas instruments. i would like to write a vhdl code to control the LVDS DDR outputs provided from the ADS5263EVM to Virtex 6 FMC pins on a ML605 board. I…
Hi Carlos,
We've given example driving circuit using THS770006 op-amp in the user guide of ADS5263 EVM. You can use similar configuration in your application. I'm adding the reference below,
ADS5263EVM Evaluation Module (Rev. A)
Please refer to…
Hi Luca,
Thanks for using our ADS5263EVM.
For details of using the fpga to capture ADS5263 output signal,
I believe both Bit Clock and Frame Clock are necessary to be used,
also I will need to find the fpga expert engineer for the detail questions…
Hello Giulio,
Thanks for using our ADS5263EVM.
On the datasheet the graph you said, it could be the following graph:
(is it correct)?
The ADC output signal may also include spur. So this graph shows SFDR (spurious-free dynamic range)
which…
Hi Satish,
Thanks for your message. Yes, I have already installed HSDC Pro GUI, and it is the most recent version. In the past I have successfully used the ADS5263EVM with the TSW1400EVM (using the ADS5263 gui and HSDC Pro gui) on the same machine.…
Thanks, Christian. I'm continuing to run tests both on my system and on the ADS5263EVM to try to narrow down the circumstances that lead to the strange noise, I'll post new data when available.
-Greg
