Hi Nishijima-san,
How are you?
Thanks for helping the customer uses TI ADS5295 device.
We will look into the customer's question on the Clock setting.
Thank you very much!
Best regards,
Chen
Part Number: ADS5295 I am using ADS5295 and I have some questions about the ADC's test pattern.!
Q1. On page 48 of the datasheet, Setting register 45h , D1=1 enables sync pattern mode.
The datasheet does not mention the sync pattern. Does this sync…
Part Number: ADS5295 Other Parts Discussed in Thread: ADS6425 Hi everyone.
In manual of ADS5295, it says ADS5295 supports 14x,16x serialization factor.
The resolution of ADS5295 is 12bit.
If i set 14x serialization factor, is output data composed…
Hello John,
Welcome to TI E2E forum!
Thank you for the interest in the ADS5295 device.
I will check your conditions on our EVM and will get back to you by Wednesday.
Can you attach the FFT plots of the clean and noisy data?
Part Number: ADS5295 Can you go into more detail regarding the PRBS function? The register seems to use 24-bits and the part is just 12-bits. How does this map to the outputs when the customer uses it? Does it map to how he sets up the interface? Is it…
Hi Guoxing,
Are you planning to generate the bit clock from an external PLL? If so, expect more jitter as shown in Figure 7-3.
Regarding the frame clock skew, you can actually pick a system clock right in the middle of the 5ns max so that you lose…
Other Parts Discussed in Thread: ADS5295 , ADS5295EVM Currently we are designing a output stage for our image sensor chip that will drive the ADS5295 input. The datasheet has a VCM of 0.95V. And a swing of +/-0.5V around VCM.
The question is what will…
Other Parts Discussed in Thread: ADS5295 Hello,
I think i'm going to order the ADS5295 plus the TSW1400 card to work together, however, i have two questions :
1) When i read the ADS5295 User's guide, the figure 1 shows the evaluation setup and it…
Other Parts Discussed in Thread: TX517 , AFE5809 , ADS52J90 , AFE5801EVM , AFE5801 , AFE58JD16 , AFE5816 , AFE5851 , ADS5294 , TX810
How to create an ultrasound system from TI’s ultrasound portfolio?
The signal chain would be TX517 -> transducer…
