Part Number: ADS5401 Tool/software: Team, My customer is asking us about ADS5401's temperature sensor. 1. What is the accuracy of the temperature sensor in ADS5401? 2. How can customer convert Reg 0x2B value to Celcius degree? - This may be answered…
Part Number: ADS5401 Hello team,
I am using Keysight ADS to simulate IBIS model of ADS5401.
The termination resistor value cannot be selected, while the output current value is selectable.
Question:
Is our IBIS model for ADS5401 includes termination…
Part Number: ADS5401 Hi Sir,
We use the ADS5401 as an ADC input board, somehow, few of boards have observed a weird symptom, the lower 5 bit of output LVDS interface always "0".
We used the "Test Patten" function of the ADS5401 and got the same…
Part Number: ADS5401 Hi Sir,
recently, we found the VREF and VCM of ADS5401 equal to 0V when we power on it.
we'd like to know the section8.3, what will impact to voltage reference block? as my understanding, the reference voltage is a power circuit…
Part Number: ADS5402 The ground pins on the upper half of the part (like rows 10-14) seem like they really want to be analog ground since that is where the AVDD22, AVDD18, and INA_P/N powers and IF are. What would happen if those GND pins surrounding…
Part Number: ADS5401 Hi,
I am recently trying to simulation the data chain from ADC digital Output to FPGA, I am using the ADS5401 IBIS model and encounter issues when importing the model into HyperLynx.
Could you help me to take a look at the issue and…
Part Number: ADS5401 Dear Team,
The customer would like to use ADS5401.
The 12-Bit and 800-Msps is good for his design.
But I am wondering do we have price competitive device?
BR
Kevin
Part Number: ADS5401 Hi,
What is the aperture delay - sampling clock rising (?) edge to the time when the actual sampling occurs, normalized to the input pins (actually balls)? Can not find any related data in the datasheet besides 100fs rms aperture…
Hi Yusuf-san,
Thanks for your reply... I wanted to know how to convert a binary data on the temp register to actual temp Decimal value though, Does it really work?
In order to convert the data, following information is needed at least. Could you tell…
