Part Number: ADS5481 What is the frequency range of the internal dither feature? Our lowest ADC input frequency is 1MHz, so we're hoping the dither frequencies are well below that. Thanks.
Hi Matteo,
Oh yes, good catch - you are correct. I used the NSD value for the ADC3561 (-150 dBFS/Hz). Yes please substitute the -158 dBFS/Hz for the ADC3563 into the equation.
I did a search with these parameters on our device page. I had to back calculate…
Other Parts Discussed in Thread: ADS5481 Hi ,
I am looking for the ADS5481 QFN64 footprint symbol. Unable to locate it on the website. I plan to interface it with an FPGA for DSP applications on FPGA.
Hi Kang,
Another TI ADC describes the AC and DC components on two different max absolutes ratings.
www.ti.com/.../ads5481.pdf
Is that the same thing with the ADS41B49?
Should it be AC signal component only max rating to 1.9V and not take into accound…
Thinh,
Please use the attached ADS5484EVM User's Guide and wherever it calls out the TSW1200EVM, you will be using the TSW1400EVM. The device you select when using HSDC Pro GUI will be called "ADS5481-85. Follow the other User's Guide that is attache…
Hi Thinh,
Please let me know if increasing the clock amplitude has any effect on your data capture.
1. We have not had any reported issues using HSDC Pro with Windows 10.
2. The datasheet is not explicit with this information, and can only guarantee…
Other Parts Discussed in Thread: ADS5481 , ADS5560 Hi Team,
My customer considers to use AD7626 for his system. http://www.analog.com/media/en/technical-documentation/data-sheets/AD7626.pdf
Could you please let me know whether TI has any alternative device…
Hi,
If none of that bank of LEDs are lit then I would suspect the FPGA does not have its bit file loaded, but in that case the GUI should not let you click the capture button. Perhaps i could see a screenshot of the HSDCPro - i would be looking for the…
Other Parts Discussed in Thread: ADS5481 , TXS02612 , TPS62150 , TVP7002 I have troubles to export bxl model to Allegro software. I try to export the footprint for the next model:
http://webench.ti.com/cad/dlbxl.cgi/TI_BXL/ADS5481_RGC_64.bxl
but, when I run…
