Part Number: ADS54J40 hi
I purchased a new analog to digital converter carte ADS54j40 I want to spin it in FPGA Kintex7, so I'm looking for the firmware of ADS54J40 to work with FPGA and process the output data of ADS54J40 in FPGA carte
thank you
Part Number: ADS54J40 DEARS.
Development has been completed on the ADS54J40.
Sometimes JESD204B LINK hangs during field test.
Why is JESD204B LINK broken?
I want to check with PRBS TEST.
How to set PRBS test in JESD204B Test Patterns in ADS54J40…
Part Number: ADS54J40 Dears.
What is the way to reduce latency in the ADS54J40?
What is the fast way to do JESD204B Link?
We are used Altera Arria 10.
Thank you
Part Number: ADS54J40 Other Parts Discussed in Thread: DAC38RF82 , hi I have two boards from TI, one is ADC (ADS54J40) and the other is DAC ( DAC38RF82) I want to use them with FPGA Kintex 7, so I generate IP core JESD204B to communicate with two boards…
Part Number: ADS54J40EVM Other Parts Discussed in Thread: ADS54J40 I am using ads54j40；Fs=1000MHz LMFS=8224 SYSREF=1000/512=1.953125 K=16
XILINX K7 325 for FPGA；
DA0->MGTXRXP0_115,DA1->MGTXRXP1_115,DA2->MGTXRXP2_115,DA3->MGTXRXP3_115,
DB0->MGTXRXP0_116…
Part Number: ADS54J40 DEARS.
I am reviewing ADS54J40 design.
My setup is as follows.
MSPS Range : 100MSPS to 600MSPS INPUT IF : 368.64Mhz INPUT TYPE : REAL Band Width : 100Mhz Sampling Clock : 491.52Mhz Decimation : 2 ADC NCO : -122.88Mhz LMFS …
Part Number: ADS54J40 Hello,
We wrote data 0x81 at general registers address 0x0 and after that,
read general registers data was 0x3c .
but In datasheet,I can see bit [6:1] is all "0".
so I am littlebit confused. Is this right action？
Part Number: ADS54J40 Other Parts Discussed in Thread: ADS54J60 Hello,
In the attached file under the Freeze IL Engine on page 2 the following lines are listed:
0: 0x4005 0x01 // Enable single channel writes 1: 0x4004 0x61 2: 0x4003 0x00 3: 0x4002…
Part Number: ADS54J40 Other Parts Discussed in Thread: ADC32RF45 , Hi
I see that the ENOB for the ADS54J40 is 11.2 whereas for the ADC32RF45 is 9.7. I wanted to check if the low ENOB for the ADC32RF45 is only this low at the max rate of 3GSPS i.e…
