Part Number: FMC-ADC-ADAPTER Other Parts Discussed in Thread: ADS54T02EVM , ADS54T02 , Hi,
I have an ADS54T02EVM Rev A TI ADC. I also have a FMC ADC Adapter Rev D from TI.
I would like to know if we can use Spartan 7 SP701 Embedded kit for acquiring the raw…
Hi Jim,
Just giving a small reminder on the previous question. Does Spartan 6 Evaluation kit or Spartan 7 Evaluation kit and Kria KV260 starter kit support the FMC-ADC adapter Rev D with ADS54T02 ADC.
Thank you Jim,
jim s said: Unfortunately, this DLL was not used by the firmware that supports the ADS54T0x EVM.
Right now it would be helpful if the Direct Access DLL be developed for the ADS54T02 EVM. (Windows OS)
For Linux, are we expected to provide…
Hi Victor,
We are double checking the reason for the inconsistency. Somebody updated the datasheet to reflect this inconsistency.
It should be G3/G4 that was changed to NC.
Basically we have the ads54t02 (dual) and the ads54t01 (single). In the dual channel…
Part Number: ADS54T02EVM Other Parts Discussed in Thread: ADS54T02 Hello
When used the ADS54T02EVM, J4 and J5 connect the 50ohm termination to GND, and reference input is 100Mhz, but the channel2 has noise like below, but if changed the 100Mhz to 200Mhz…
Hi,
Those are the correct pins listed in the datasheet. If you were to compare to the ADS54T02 datasheet you can see that those pairs of NC pins are for functions related to triggering for that other device. And I checked the schematics for our lab characterization…
