Other Parts Discussed in Thread: ADS58C48 Hi
I just want to know if the clock signal input of ADS58C48 EVM can take directly a sine wave or I have to add an circuit before clock input
thanks
Other Parts Discussed in Thread: ADS58C48 Hi,
I just want to ask you to help me about an interface spi
In
fact I have to configure an ADC (ADS58C48) with xilinx fpga (virtex6)
via spi link
my fpga is master and adc is slave but I just need…
Other Parts Discussed in Thread: ADS58C48 , FMC-ADC-ADAPTER Hi all, my ADS58C48 probably is not setup correctly, and the output data from CH-A to CH-D looks weird. Hope somebody here can do a favor. Many thank in advance.
I believe my ADS58C48EVM has been…
Other Parts Discussed in Thread: ADS58C48 , ADS5281EVM Hello, I am evaluating the ADS58C48 for use in an experiment at Fermilab. At some point I will need to design a board that is close, in terms of functionality, to the TSW1200EVM. I'll be using a Xilinx…
Other Parts Discussed in Thread: ADS58C48 , DAC3482 , ADS4229 , PGA870 Hi
Trying to work out what the best ADC/DAC solution would be for me. I am thinking of getting (Along with TSW1400EVM) a ADS58C48 four channel ADC to capture 4 baseband signals simultaneously…
Other Parts Discussed in Thread: ADS58C48 Hi everybody,
I just want to ask you if someone can give me Jumper setting for serial interface for ADS58C48 EV.
I read this user's guide http://focus.ti.com/lit/ug/slau313/slau313.pdf but there is just default…
Other Parts Discussed in Thread: ADS5282EVM , ADS5282 , ADS58C48 Hi Folks!
I have a queation about the FMC ADC Adapter Card. I want to connect some High Speed ADC's to an SP605 eval Board from Xilinx. Will the Adaptor work with full functionality on an FMC…
Sent to the address provided,
but please note:
The ADS58C48 that you are considering is a four channel device, and with that many LVDS outputs it uses most of the differential pairs on the Samtec connector on the EVM. The TSW1200 has this many LVDS…
Henry,
Open a new post to get back with Chen Kung. Just enter the ADS52J90 part number and this should go to the medical data converter group forum.
They should have most of the answers for these.
Regarding the PC memory, I would think 16GB should be…
