Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: ADS58J89 Hello,
I'd like to clarify whether it's possible to use ADS58J89 with other sampling rates than 250MSps and 500MSps, say 300MSps? I'd like to know whether there are any limitations with regard to ADC part or JESD204 interface when…
Hi Farshid,
The right .ini file for ADS58J89 was not included in v5p0 of HSDCPRO. I will have them added to the next release.
But you can use the ini file ADS54j54_LMF_442 also for your testing because this device JESD204B interface is identical to ADS58J89…
Hi Farshid,
Looking at your Matlab workspace again, your firmware filepath is incorrect. Change the back slash to a forward slash after 14j56 RevD Details\firmware\
Alternatively, you can comment out line 86 and manually download the firmware before…
Part Number: ADS58J89EVM Unable to successfully connect a ADS58J89 to TSW14J56 Rev E.
I have a ADS32RF45EVM and can connect with this same TSW14J56.
I tried loading the evaluation file without success.
I used the ADS58J88_500M_442.cfg for the J89 EVM…
Other Parts Discussed in Thread: ADS58J89 I am using the ADS58J89 Board to do some risk reduction while we design our board. After looking at the schematic I see it is using an Altera EPM3064A to do some kind of function between the USB/serial chip and…
Other Parts Discussed in Thread: ADS58J89 Hello Team,
Please allow me to ask you about ADS58J89 design.
Datasheet says to supply 1.9V to AVDD18 pin, however, 1.8V is supplied to AVDD18 in the EVM schematic. Our customer had designed their schematic based…
Hello,
We've got a customer who wants to know if the ADS58J89-EVM will connect to the Xilinx KCU105 through the FMC connector without issues. They are specifically concerned that the U3B TTL has a 3.3V supply and the LVDS IO are driven from 1.8V supplies…
Hi,
Could you please share the IBIS-AMI model to us since our customer would like to obtain it although we found the IBIS model on TI website ?
Best regards, Kato
Other Parts Discussed in Thread: ADS58J89 I'm trying to get my ADS58J89 evaluation module set up and working. When I start the GUI software I get a "FTDI Device Not Connected Properly" Error. The board is powered on and is recognized as "USB Serial…
Part Number: ADS54J54 Other Parts Discussed in Thread: , ADS58J89 I'm designing the power tree for a ADS54J54. I've noticed that on the ADS54J54EVM the PLLVDD is set for 1.9V rather than 1.8V.
Below is a snip from the EVM schematic (Sheet 9, ADS58J89…
