Other Parts Discussed in Thread: ADS62C17 Hi;
I downloaded the ads62c17 ibis model from TI web but it turned out to be ads61xx, not ads62c17. And I want to check impedance matching of the pin 25&26, that is sampling clock input, but in the ibis file those…
Other Parts Discussed in Thread: ADS62C17 Hi, Matt;
Happy thanksgiving!
Would you please help me to the idle-channel noise.
We built a PCB with ADS62C17 and got idle channel noise like the attached picture, is this a right performance? I didn't find idle…
Other Parts Discussed in Thread: ADS62C17 HI;
I saw in the datasheet, ADS62C17's AC PSRR specs is 25dB for 100mv p-p signal on the AVDD supply, does this means if there is a 100mV p-p noise voltage on the AVDD supply, the ADC's output will has a 5.6mV…
Other Parts Discussed in Thread: ADS62C17 Hi, everyone;
We have a PCB which has three ADS62C17 ADC and some other analog and digital IC on it.
My question is: to achieve the best ENOB performance, do we need deploy one LDO for each ADS62C17? On the base…
Other Parts Discussed in Thread: ADS62C17 HI, I'm doing a work which uses ads62c17 to acquiste data and send the data to Xilinx FPGA evm ML605. The sampling clock is 100MHZ. we program the adc to output a ramp data to verify the signal integration and…
Other Parts Discussed in Thread: ADS62C17
I'm doing a work with ADS62C17, I got a spectrum like this. the noise floor seem be OK, but at the low frequency region nearby DC to 2.5MHZ, there is a noise rise about 10dB. does anyone know what wrong is?…
The oscillator data sheet will have the phase noise numbers. Attached is a data sheet from an oscillator that has ultra low phase noise. We use this part on many of our EVM's. I am not an expert on this field but the document I sent and the ones attached…
Matt,
Thank you very much for your reply.
Sorry I can not paste the schematic to this page directly so I will send them to you through mail.
The ADC part I use is ADS62C17.
Thanks again :)
Yinon,
Yes, using a 1:N transformer will allow you to increase the signal swing without adding noise as this is a passive device. You will need to be careful when choosing a transformer as the linearity will vary from model to model. I have attached a…
