Part Number: ADS62P24 Hello,
I have a question for the input signal range for ADS62P24. In my circuit, I want to set the input signal range to 2 Vpp through th ADS62P24 PIN setting. But in fact, by test the input signal range is just 1.5 Vpp. Could you…
Part Number: ADS62P24 Hello,
I have a question for the input signal range problem for ADS62P24. I want to set the input signal range to 2 Vpp, but in fact the input range is just 1.5Vpp. The IC pin setting in my circuit is in my attacthment. Please help…
Part Number: ADS62P24 Other Parts Discussed in Thread: ADS62P22 I have a design where I'm seeing two 'bins' of ADS62P24 behavior regarding Vcm. These 'bins' may be different lots of the ADS62P24, that's not clear to me yet.
One group…
Hi Jim,
Again, thanks for your thoughts. As you suggested, we made plots of output counts vs “input voltage” when using both the “straight binary” and “2s complement” setting for the ADS62P24. Please note that “input…
Other Parts Discussed in Thread: ADS62P24 I am using EVM of ADS62p24 and TSW1200 EVM to capture 2 channels of input signals to ADS62p24. But it seems I can not capture 2 channels simultaneously by using the GUI software for TSW1200 provided by TI.
Is…
Other Parts Discussed in Thread: ADS62P24 Configuration is ADS62P24_EVM connected to a TSW1200 using DDR interface. I have a 1.5MHz 1.5Vpp triangle wave going into the A and B ports with a 105MHz 1.5Vpp 50ohm source clock. I have custom FPGA code on the…
Other Parts Discussed in Thread: ADS62P24 Hi,I have several questions about ADS62P24EVM and TSW1400
1.I bought ADS62P24 EVM from mouser electronics,but I found the version is B while TI's website display VERSION C,I didn't find the datasheet about REV…
Other Parts Discussed in Thread: ADS62P49 , ADS62P28 , ADS62P29 , ADS62P48 , ADS6424 , ADS4249 , ADS62P24 Are there any other pin-compatible options for the ADS62P48 ? I am interested in an alternate ADC that will have lower low-frequency noise, ideally a chopper…
Hi Richard,
I am using TSW1200EVM with ADS62p24. Could you please send me the TSW1200 FPGA sourcecode ( verlog and bit file) for my reference?
My email: lijin_1@hotmail.com
Thanks and best regards,
Jin
Hi,
The data format of the sample data out of the ADS4226 and the ADS62P24 are the same, so for the verilog code for the TSW1200 firmware there is no difference between the two. Both EVMs routed the sample data to the same pairs on the connector that…
