Part Number: ADS7044 Please let me confirm the control method of ADS7044. When reading SDO, is it necessary to wait some time after setting SCLK to Low level? In my current environment If I read SDO about 2μs after setting SCLK to low level, the incorrect…
Part Number: ADS7044 Hi Experts,
Seeking your assistance on this query posting on behalf of my Cx:
SETUP :
I have two analog-to-digital converters (both ADS7044IDCUR) setup for acquisition of a static, DC signal and communicating with a microcontroller…
Part Number: ADS7044 Other Parts Discussed in Thread: ADS7054 , ADS7047 , ADS7057 Hello,
We use the ADS7044 (X2SON) package currently but there is limited supply. I found the ADS7047, ADS7054, and ADS7057 which look to be pin to pin, but I wanted to confirm…
Part Number: ADS7044 Helo Team,
My customer wanted to access this file in the e2e thread below, unfortunately, it seems that the file is now removed.
Link: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/742253/ads7044evm…
Part Number: ADS7044 Other Parts Discussed in Thread: OPA1632 Hi Team,
Can you please check and advise following request;
"
- We will read differentially "OPA1632" and SAR ADC "ADS7044".
- We are thinking of filtering our signal…
Part Number: ADS7044 Hi Team,
We would like to confirm if there is an expected error at 455Khz input, however 400Khz appears to be OK.
Thank you in advance for your input.
-Mark
Part Number: ADS7044 Hi,
I try to read data from the IC but I never get the expected value.
I supply the device with 3,1V and both Inputs have the same voltage 1,5V.
The clock is around 1,1MHz and I thought that I will get a value about "0", calibration…
Part Number: ADS7044 Hi,
I'm looking for the current draw numbers on the ADS7044 at 1Ksps with an Avdd of 3V. Figure 30 in the datasheet helps but its tough to estimate a number from it.
Regards,
Jake
Other Parts Discussed in Thread: ADS7044 Hi, folks
1) Sample and hold exact timing
I would like to know exact sample&hold timing which sw is described in figure 33.
I guess close timing(Sample) is @(posedge 14th of SCLK) and open timing (Hold) is…
Hello,
Unfortunately, there is no IBIS model for this device, or any similar devices. This was released over a decade ago, and is part of an acquisition, thus there is not much existing model work.
If you are open to using a newer device instead, I went…