Part Number: ADS7142 Hi, I am currently working on a STM32 library for the ADS7142. Communication and programming works fine, but polling conversion data doesn't work yet.
I can set the start conversion bit and verify it using the conversion status…
Part Number: BOOSTXL-ADS7142-Q1 Hello, I noticed a question on E2E about the BOOSTXL-ADS7142-Q1 not coming with the PAMB baseboard. Was it a one-off mistake in the shipment? I see the BOOSTXL-ADS7142-Q1 available on Mouser, and would like to know if it…
Part Number: ADS7142ADS7142
I hope my equipment is in the state of threshold alarm during operation, and can notify me when the alarm is triggered. At the same time, when there is no alarm, I need to query the value, and I can switch to other mode readings…
Part Number: ADS7142
The ADS7142 data sheet section 7.3.2 says that the offset can be calibrated by setting the TRIG OFFCAL bit.
it goes on to say ‘the device calibrates the offset on power up’
My question is: Will the device calibrate the…
Part Number: ADS7142 Hi, We are currently using an ADS7142 device that connects to a Microchip dsPIC33EP128MC504 I2C channel using a MAX14850 isolator. We are running the bus at 400KHz. I am using a Digiview DV3400 logic analyser to monitor the I2C signals…
Part Number: ADS7142-Q1 Hello, on the data sheet
I found that there are 'full-scale input voltage' and 'absolute voltage range' for each configuration.
Would you please explain a little bit more about them? I couldn't find more information…