Part Number: ADS7830 Hi Team,
Our customer is asking if we have an I2C calculator application or any excel template that can help them with their calculation?
So far, the only document I found is SLVA689. Do we have a calculator file that we can share…
Part Number: ADS7830 Hi team,
My customer want to test 12V_AUX on the input channel 3 of the ADC, the 3.3V VDD is not applied at that time.
Can we apply the input voltage at the input before the VDD voltage is applied?
Part Number: ADS7830 Hi team,
my customer is using our ADS7830 in server, the requirements for the resolution and sample rate is not critical.
But the datasheet is not specific enough, could you help give the detailed calculating method for the output…
Hello,
Apologies for the late response,
You should be able to use resistor values in the tens to hundred of thousands. ie 10k, 100k
For a 12V rail down to 2.5V, you can use R1 = 172K, R2 = 45K
For a 7V rail down to 2.5, you can use R1=100k, R2 = 55k
This…
Part Number: ADS7830 Hello,
Our customer has a question how COM pin should be handled at single ended operation. even he knows COM pin must be connected to GND but did not understand "-IN" description in Table 2.
Could you please help him out…
Part Number: ADS7830 Other Parts Discussed in Thread: PCA9515 Hi team, Could you tell me about ACK.
The ACK from ADC7830 floats from about 500 mV. Why does GND float as much as 500 mV? Sincerely. Kengo.
Part Number: ADS7830 Tool/software: TI C/C++ Compiler Hi Sir,
We use ADS7830 as HW monitor to monitor Baseboard power rail status. And we access this chip via I2C . When we access the channel which we used ,we can get the right value . but if we first access…
Part Number: ADS7830
Hello,
On the ADS7830 datasheet it lists the sample rates below, were interested in 400kHz.
Is this sample rate per channel of the mux (ie 10ksps per input) or in total (ie 1.25ksps per input)?
If a customer wants to use 4 ADS7830s…
Part Number: ADS7830 power on our system board and master(BMC) wonder to communicate with ADS7830IPWR and found the data bus keep L, the timeout timer of our BMC is about 300ms, so BMC abort this enquire, we wonder what kind of situation will cause this…
