Part Number: ADS7883 Other Parts Discussed in Thread: TINA-TI We require spice model of ADS7883 since its model is not directly available in PSpice for TI software.
Part Number: ADS7883 Other Parts Discussed in Thread: ADS7886 , Hi Team,
We are looking for an ADC with the following specifications.
Min value of SCLK of ADS7883 and ADS7886 is not specified.
Can I use it with “SCLK=50Hz”?
And, could you…
Part Number: ADS7883 Hi Support,
We are looking for the best voltage reference IC for ADS7883. Please tell me know if there is a recommended voltage reference IC Also, please tell me how many ADS7883 can be driven by that IC.
Part Number: ADS7883 My circuit description:
+3.3V VDD
Input is a pulsed square wave of varying voltage, 300us pulse width.
The ADS7883SBDBV is used to measure the voltage of these pulses. I often get accurate measurements. Intermittently, I will…
Power down mode is enabled by a rising CS edge between the 2 nd SCLK falling edge and the 10 th SCLK falling edge. In power down, SDO is in tri-stated and current consumption is decreased to hundreds of micro-amps.
To exit, or get out of, power down…
The ADS7883 is a higher sampling SAR device, supporting up to 3MSPS sampling rate and the device is generally meant to be used in applications requiring higher sampling rates.
The device is not designed to support long periods of idle time and the power…
Part Number: ADS7883 HI,
For the ADS7883 power-down mode, is there any way for the device to enter power-down mode other than the following:
From the SPI interface based on: “The device enters power-down mode if CS goes high anytime after the 2nd…
Hi there, and welcome to our e2e forum!
This probably should have been a 'Ask a new question' sort of post since your query does not seem to relate to the clock jitter of the ADS7883. By Nyquist, a 3MSPS ADC device could sample a 1.5MHz signal. For…
Part Number: ADS7883
SPI signals which I sampled from ADS7883 component in my board, are attached above.
Above the signals there is a ruler with numerated ticks.
The time between each two adjacent ticks is 1/75Mhz. The SCLK is spread over…
