Search tips
Showing 11 results View by: Thread Post Sort by
    Answered

  • ADS7956: Date codes of older stock

    Resolved
    Part Number: ADS7956 Hi, We have used this in a design of ours and unfortunately the part cannot be found in quantities needed for our next production. Rochester seems to have an older stock. Our manufacturer has indicated date code of '14+', which I…
    • Resolved
    • Answered

  • ADS7956: Chanel Resistance of the Mux on the ADS7956 ADCs

    Resolved
    Part Number: ADS7956 Hi Team, Customer is looking for the max and min of the Mux on the ADS7956 ADCs. According to customer, the datasheet only provide 200 ohms (Figure 62 on page 48). Also, they want to know if there are other information that exists…
    • Resolved

  • ADS7956: Auto Mode1 communication error

    TI Thinks Resolved
    Part Number: ADS7956 Hi, I am sorry that my reply was delayed in the previous post. I share the customer situation. >The Auto mode 1 will sampled channels that have been pre-programmed. If no channels were selected then this mode will not function properly…

  • ADS7956: Communication error

    TI Thinks Resolved
    Part Number: ADS7956 Hi, In our customer, while running in AutoMODE1, the phenomenon that only ch0 data is received occurs. When the DC motor is operated on the customer's application, this phenomenon rarely continues. Is there a possibility that external…
    • Answered

  • RE: ADS7956: ADS7957EVM mod for ADS7956?

    Resolved
    Joseph, The ADS7956 works on the ADS7953EVM. The only change I had to do was, as you stated, load the ADS7953's executable as a plug-in to ADCPro. (And the ADS7956 works on the ADS7957EVM with the ADS7957 executable loaded into the ADCPro.) Thanks…
    • Answered

  • ADS7956: It aren't match with Table

    Resolved
    Part Number: ADS7956 July,2015 Revised Version DataSheet of ADS7956 38 pages Table 9 1111 1111 1111 = 3FF ? 0011 1111 1111 = 3FF isn't it? i think just.. simple mis-Writing isn't it? below h"200" and h"1ff" also..
    • Resolved

  • ADS7956: General Questions for initialization

    TI Thinks Resolved
    Other Parts Discussed in Thread: ADS7956 Hi, I'm trying to interface the ADS7956 with the Arduino over SPI so I can read the digital converted voltage values over the SPI bus. I'm unsure on how to initialize the chip for Auto-1 mode. I'm not using the…

  • ADS7956 Data Values don't match device specification

    Other Parts Discussed in Thread: ADS7956 Hi, I'm interfacing the ADS7956, which is a 10 bit 12 channel ADC, with the Arduino Uno using SPI. I'm able to establish successful communication with the device, but the values seem incorrect. I'm supplying the…
    • Answered

  • [FAQ] Texas Instruments General Purpose ADC Overview

    Resolved
    Other Parts Discussed in Thread: ADS7052 , ADS7950 , TLA2021 , ADS7961 , ADS7958 , TLA2022 , ADS7142 , ADC128S102 , TLA2024 , ADS7042 , ADS7953 , ADS7046 , ADS7954 , ADS7959 , ADS7924 , ADS7041 , ADS7040 , ADS7951 , ADS7960 , ADS8028 , ADS7957 , ADS7956 , ADS7056 , ADS7138 …
    • Resolved

  • RE: Linux/ADS7953EVM-PDK: Unable to read ADC output both in One-shot Mode and Continuous Mode

    Hi Vishy, the problem was caused by a wrong description of the ADC in the device tree. See the following binding: * Texas Instruments ADS7950 family of A/DC chips Required properties: - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952…

Didn't find what you are looking for? Post a new question.