Part Number: ADS8331 Tool/software: Hi,
We use the ADS8331 for the AI project, now, please kindly review our schematic, we have below issue:
1. I connected the CH0 to 5V, and ll the data read from channels CH0 to CH3 are 0XECB8;
2. I connected the…
Part Number: ADS8331 Tool/software: Hello,
I am interfacing an ADS8331 ADC with a dsPIC33EP128GP504 microcontroller using SPI. I am facing an issue where the EOC pin never toggles during conversion. May be this is the issue that am not getting the same…
Part Number: ADS8331 Hi,
I have some questions.
1. Reserved command
After the EMC (3.3Hz, 5kV) test, the operation is abnormal, and the register value is changed.
If an arbitrary value is written to the reserved command (0x8h - 0xAh) in CMR…
Part Number: ADS8331 I am reading 4 channels in ADS8331. I am getting tag bits correct but ADC value is wrong.
Data received.= 0X17CE(6094)
TAG BITS= 0b0100000000000000
but pin voltage is 2.462V @ channel no. 2.
Vref = 4.105V
CFR= 110011111111…
Part Number: ADS8331 Other Parts Discussed in Thread: OPA320 Hi ,
I am Rahul from WT microelectronics.
One of my customer using ADC8331 and communicate with MCU through SPI.
Issue is that data received by ADC is not correct.
Please check below…
Antonio,
The daisy frame length and timing requirements of the ADS8331 and ADS1298 are different; therefore, I don't believe you can daisy chain 4xADS8331 and 4xADS1298 together.
Page 34, 35 of the ADS8331 datasheet shows the daisy chain mode timing…
Part Number: ADS8331 Hi Team,
I would like to know about ADS8331 specification.
How do I understand Analog input BW (MHz)?
Does it mean that the flat band falls by 3dB.
I understand that the band is extended when the input goes low.
I am a…
Part Number: ADS8331 Regarding the SPI interface, in the datasheet it is not explicitly mentioned that DOUT signal goes to a high-impedance state when /CS is high.
Can someone confirm or reject the behavior?
Thanks
Part Number: ADS8331 Hi Team,
Currently, my customer is reviewing and evaluating TI's AD converter, ADS8331, and they are asking questions about how to use in the following cases.
Please support the following questions from customer.
==========…
