Part Number: ADS8350 Other Parts Discussed in Thread: ADS8860 , ADS8681 , ADS8320 I am looking for a single-channel alternative to ADS8350 that can do:
- Pseudo-Differential Inputs - 2.5Vref - 24MHz SCLK - 1.5us xCS Toggle Period (Close to 750kSPS)…
Part Number: ADS8350
The ADS8350 datasheet lists SNR as 84dB.
I followed the following equations to calculate the internal ADC noise in Vrms
Given the 84dB from the DS, and the fact this was measured with Vref = 2.5V, using a -0.5dBFSR sine wave…
Part Number: ADS8350 Hi guys, can anybody confirm for me the numbers used for the SNR calculation?
A customer I have is asking about how SNR was actually obtained.
I am attaching an image below for reference but this is what I have so far...
This…
Part Number: ADS8350 Hello,
I have a question for ADS8350 VOL specification.
Now I have to add external pull-up on SDO-x line for some reason.
Then I want to understand acceptable pull-up resister value range.
The datasheet defines VOL MAX…
Hi,
"DAQ Circuit" is mentioned in the figure 56 on the datasheet.
This antialiasing filter is structured with 10Ω*2 and 3.9nF.
Could you tell me that how is this filter designed?
Or is this filter the charge injection filter not antialiasing filter…
Hi M Teckin,
Welcome to the forum.
With AINP and AINN set to 2.5V, the ADS8350 expected conversion result should be close to x0000h or x7FFFh (two's complement format).
The ADS8350 is a SAR converter, therefore it needs to be driven with a low impedance…
Hi Keith,
Thank you. This resolved *one of* the problems. Now I have SDCC driver installed and the EVM recognized in Device Manager when connected.
The "Loading Application..." window appears accompanied by another irresponsive window and the only…
Part Number: ADS8353 Other Parts Discussed in Thread: ADS8350 Hello,
I would like you to confirm about Full Power BandWidth spec for ADS8353.
When I confirmed datasheet of "ADS8350" (high sampling rate version), I found this spec. So I believe that…
Part Number: ADS7817 Other Parts Discussed in Thread: ADS8350 Hello,
I would like to know the bandwidth information of ADS7817, especially -3dB case.
Like ADS8350 defines Full-power bandwidth as 25MHz at -3dB and 5MHz at -0.1dB in the datasheet…
Hi Merlin,
It looks like we finally have a workaround for this issue. Please follow the steps below and let me know the result.
Take a baselined (clean) Win10 PC
Install the ADS8350 GUI and the LabView Runtime
Ensure that the signed SDCC driver…
