Part Number: ADS8588S DOUTA pin only show output value of "0" when reading using SPI protocol.
The configuration of pins are as shown in the attached file.
Steps followed.
1) Setup Serial configuration as shown in the image.
2) Provide 2…
Part Number: ADS8588S Hi TI,
I read the data sheet of ADS8588S and couldn't understand if we could use the inputs as differential inputs or not ?
if yes, can we use 8 differential input channels ?
Mamzi
Hi Feng,
Group delay is constant and same as phase delay for linear phase filters. However, this filter is not a linear phase filter.
Best Regards,
Dale
Part Number: ADS8588S Other Parts Discussed in Thread: ADS8588H Hi,
Good Day. I have a customer who is working with ADS8588S. Please see below his query for your reference. Thank you very much.
I want to interface ADS8588s ADC with my stm32 as host over…
Part Number: ADS8588H hello TI team,
is there any c driver firmware availble for ads8588h to interact over SPI interface , to access regsisters, read data from adc
Part Number: ADS8588S Hello,
We have LPC1788 Microcontroller and want to interface with ADS8588S.
So how can we interface ?
And also we need help for sampling rate and digital data reading.
We welcome your suggestions if missing something.
Thank you…
Part Number: ADS8588S
Dear,
I am making the DA measure system by ADS8588S chip.
But, I had some problem for sampling rate, please advice this problem
[Test status]
used driver : ad7606.c / ad7606.h / ad7606_spi.c in kernel's default driver
input test…
Part Number: ADS8588S Hello,
I have a problem reading the ADC data from spi interface of the ADS8588S. In the board there are two different ADCs and both behaves in the same way. the ADC are commanded by an FPGA, below an image of the waveforms taken from…
Part Number: ADS8588S Hi,
Kindly review the board file of ADC designed using IC ADS8588SIPMR .
Schematics and Gerber file is attached. Kindly go through it and let me know your comments.
Regards
Nikhitha antony
