Part Number: ADS8681 Other Parts Discussed in Thread: ADS8699 Hi,
Customer cannot change the range select register. Below is the details.
I am trying to change the range select register of the ADS8681IPW, however it never changes from the default…
Hi Kanchan,
It looks like you posted the same query twice. Please review the ADS8681 datasheet, Figure 73 on page 39. All devices in the daisy chain should be configured the same way, you would need to send the 32-bit configuration data twice so that…
Part Number: ADS8681 Other Parts Discussed in Thread: ADS8688 , ADS8588S Dears:
Customer uses ADS8681 in their 64 channels ADC board.
There are 64 channels signals of Step signal switching input and the switching time is 1us.
Can we use the ADS8681…
Part Number: ADS8681 Hello Dale,
i have one more query.
in ads8681 i did the daisy chain connections for two devices exactly as follows
.
so while configuring the device .. SDO of the processor transmit the data to the SDI of the 1st device…
Part Number: ADS8681 Hello Dale,
i done the configurations as u suggested given below still getting the same resultsi.e. the only second device output not getting the 1st device output.
spi_write_byte_reg(0X02, 0X01); //device ID reg. spi_write_byte_reg…
Part Number: ADS8681 Dale Li wrote the following post at Feb 12, 2019 5:54 PM:Hi Kanchan, I assume that you are using below connections to your microcontroller(as a master): 1. Using SDI from CN3 connector to your microcontroller's MOSI. 2. Using SDO…
Part Number: ADS8681 Other Parts Discussed in Thread: ADS8860 , ADS8920B
Hi expert,
Customer want to use ADC in hydrogen commercial vehicle. Could you recommend a suit device for us? Here are the requirements:
Input Voltage: -5 V~+5 V
Channel…
Hi Kanchan,
I assume that you are using below connections to your microcontroller(as a master):
1. Using SDI from CN3 connector to your microcontroller's MOSI.
2. Using SDO from CN5 connector to your microcontroller's MISO.
3. You are not using SDO…
