Part Number: ADS8686SEVM-PDK Tool/software: Hello
I have read in your user guide of ADS8686SEVM-PDK that the ADC sampling ins non-coherent? is it true?
This means that you are not synchronized the signal to the ADC sampling?
Doesn't it affect on SNR measurement…
Part Number: ADS8686SEVM-PDK Tool/software: I need to know in the power terminal block T1 PWR a 5.5V pin connector is present over there can I give 5V or 12V instead of 5.5V .If exactly 5.5V have to give can you suggest me a power supply board.
Part Number: ADS8686SEVM-PDK Tool/software: I am trying to take output from J18 connector to my microcontroller instead of using PHI, while I check the schematic all SPI pins going to PHI is having resistors R114,R115,R116,R117,R118,R119,R121,R123, so…
Part Number: ADS8686SEVM-PDK Tool/software: Hello, in this post Dale said that it was possbile to get Gerbers for ADS8686SEVM-PDK. I'd like to get them, if it is still possible.
Thanks
Part Number: ADS8686SEVM-PDK Hello Selected to order ADS8686SEVM Does it includes the 16 channels ADS8686 board and the ADS8686-PDK PHI board or do I need to order them as two separate items. As paired they are a single item in MOUSER. 595-ADS8686SEVM…
Part Number: ADS8686SEVM-PDK Other Parts Discussed in Thread: ADS8686S Hello,
I tried to capture signal and see on GUI, I used one of the analog channels and send 20 mVpp - 200 mHz sine signal, but i have just read 0V on analog channel AIN0 on GUI, after…
Part Number: ADS8686SEVM-PDK
ADS8686S-EVM is used to obtain the A/D value of each CH. As a test, I am using a DC generator to apply voltage directly to each channel, but when I convert the obtained value to voltage with 16 bits, it differs from the input…
Part Number: ADS8686SEVM-PDK Other Parts Discussed in Thread: ADS8686S ADS8686S-EVM is used to obtain the A/D value of each CH. As a test, I am using a DC generator to apply voltage directly to each channel, but when I convert the obtained value to voltage…
Part Number: ADS8686SEVM-PDK To perform A/D conversion, I manually press the reset button to reset the device. Is it possible to issue an instruction equivalent to pressing the reset button externally using SPI communication?
