Part Number: ADS8694 Dear Technical Support Team,
Let me check the power supply and GND. Q1. According to Fig.109 in data sheet, AVDD and DVDD seem to use the same 5V power supply. Does it mean that the same power supply can be used? Q2.
Is it okay to…
Part Number: ADS8694 Other Parts Discussed in Thread: ADS8664 Hi,
We are using ADS8664IDBT in our existing design and planning to use ADS8694IDBT due to higher resolution requirement.
are these chips 1:1 compatible ? I could see pin assignments of both…
Part Number: ADS8694 Other Parts Discussed in Thread: ADS8686S , ADS125H02 Hi,
Can ADS8694 be utilized for differential input?
If not, could you let me know why A_nGND can support only +/-0.1?
If there is another ADC for differential input, please recommend…
Part Number: ADS8694 Other Parts Discussed in Thread: TM4C1294NCPDT , Hii,
I am using TM4C1294NCPDT to communicate with ADS8694, i am able to set registers and read it back but while reading analog data i am getting below data and ones check attached code…
Part Number: ADS8694 I have some input signal, I want to collect this signal at a sampling frequency of somewhere in between 100kHz and 200kHz and using the 18 bits. After collecting this signal with the ADS8694, I want to send the data to the STM32WB…
Part Number: ADS8694 Hii,
I am using ADS8694 ,
When i am going to communicate this IC with Arduino, communication is happening but
when i am going to acquire the data , i am not able to get the correct data. below data is getting when i am giving 1v as…
Part Number: ADS8694 Hii,
I am using ADS8694,
When i am going to communicate this IC with Arduino, communication is happening but
when i am going to acquire the data , i am not able to get the correct data. below data is getting when i am giving 1v as…
Part Number: ADS8694
Hii,
I need sample code to interface the ADS8694IDBT with Arduino Uno.
Would you please send the sample code for ADS8694 to me.
Thanks & Regards,
Venkatadri.
Part Number: ADS8694
Hi Dale, Cynthia an all the others knowing about the ADS8694! I am trying to use the ADS8694 in a custom board controlled by the F28379 Launchpad.
My idea was to use spi, but as I did not have any results, decided to check communication…
Part Number: ADS8694 Can I use an external Vref of 2.048V (or 1.024V) with the ADS8694 ? The datasheet talks of an external Vref, but limits it to only 4.096V.
I would like to get an input Voltage range of +/- 1.28V (with a 2.048V external Vref) or a…