Part Number: AFE4405EVM Currently, I have the AFE4405EVM GUI software. But while the board is connected to PC through USB I try to open the software. But a error message pops up saying the following:
An error occured while communicating with the devi…
Part Number: AFE4405EVM Other Parts Discussed in Thread: AFE4405 I can't find AFE4405 GUI Software to download. I have read that i need to send a request for the software but i couldn't find how to send this request. Can somebody please help ? …
Part Number: AFE4405EVM Other Parts Discussed in Thread: AFE4405 I cannot get the board to work with two PDs.
I change settings according to the manual (page 44-46) but the response is not in line with what I expect (noisy, too low signal level). What…
Part Number: AFE4405EVM Hi,
I am going to get PPG data after applying auto calibration. It seems that the firmware for MSP430 of AFE4405EVM supports calibration
but the current PC GUI app doesn't have a way to send a command to activate it.
To make…
Part Number: AFE4405EVM Other Parts Discussed in Thread: AFE4405 Hi,
I am capturing PPG data using AFE4405EVM board. By the way, the minimum sampling rate is 61.1Hz set by the AFE4405EVM GUI.
Why this restriction is set in the EVM GUI ? I am considering…
Part Number: AFE4405EVM Hey Community,
I want to communicate with SPI to the AFE4405EVM.
So I need to change the I2C_SPI_SEL to RX_SUP.
But i cant find this PIN. Neither on my Hardware nor on my Software Register.
Thank you in anticipation
Hi TI Folks, Good day to you. I am facing the same problem, after I purchased the AFE4405EVM, there is no supported software inside the parcel, then when I follow the user's guide to download the related software through website http://www.ti.com…
Part Number: AFE4405EVM Other Parts Discussed in Thread: AFE4405 Hi,
I've tried to capture the signal from wrist using the afe4405 EVM and 2 LED/PD boards(TI board with 2 green LEDs and 6 LEDs(green/red/IR) from Osram.
After trying several times during…
