Part Number: AFE5818EVM What could be causing significant fluctuations in the amplitude of ADC data over time when I connect AFE5818EVM to TSW1400EVM, and input a fixed amplitude 100mV, 1MHz sine signal to the input of AFE5818EVM using a signal generator…
Part Number: AFE5818EVM Other Parts Discussed in Thread: AFE5818 i use AFE5818 and TSW1400 when i want to capture signal there occured "
Read DDR to file
TIMED _ OUT _ ERROR Possible reasons for Time Out Error : 1.FPGA may be in reset . Please check…
Part Number: AFE5818EVM
Hello :))
I'm using an AFE5818EVM to receive ultrasound signals along with a TSW1400EVM to capture and evaluate the data. This works very well. Thank you!
Now I would like to make use of a Raspberry Pi to automatically extract…
Part Number: AFE5818EVM Hello,
One customer used AFE5818EVM with FPGA to write command to test the data output by SPI, the sampling rate is 40Ms/s, output DCLK, FCLK and data are normal. But when he used signal generator to output 5Mhz, 5Vpp sinewave…
Part Number: AFE5818EVM Other Parts Discussed in Thread: AFE5818 I am currently using AFE5818 for my project. I want to interface AFE5818 with ZED board and want to capture data on ZED board. For this I am using HMC-DAQ GUI provided by TI to configure…
Part Number: AFE5818EVM Other Parts Discussed in Thread: AFE5818 , 1. The computer cannot recognize the AFE5818 development board, the computer device manager shows that the driver of the device has not been installed, and the device has no compatible driver…
Part Number: AFE5818EVM Other Parts Discussed in Thread: AFE5818 , AFE58JD18EVM Hello,
I'm trying to capture ultrasound signals in the range of 1-4 MHz. For this, I was suggested to use the AFE5818EVM along with the TSW1400EVM for data collection. However…
Part Number: AFE5818EVM Other Parts Discussed in Thread: AFE5818 Hi, is it possible to capture data from multiple AFE5818EVM ADCs simultaneously using the same TSW1400EVM capture board? Or would I need one TSW1400 per AFE5818EVM? I asked this question…
Part Number: TSW1400EVM Hello TI, please help to address this issue.
Here are steps that I carried out.
Step1 . Connect PC to the TSW1400EVM with a Mini-port USB 2.0 cable and run FT_Prog_v3.12.31.639 on the PC.
Step2 . Do "Scan & Parse" USB ports in FTDI…