Part Number: AFE5851 Tool/software: 1. Testing for the AFE output setup
All the signal VOUT_S<0>, …, VOUT_S<15>, VOUT_S<16>,…,VOUT_S<31> are tied together, and could be adjusted by a on board pot
The another signal…
Here r13 is the reference designator for SAMTEC connector . 1A,1B to 40A,40B are the connector pins. Top side of connector pins are assigned to device pins for connection and rest everything is made ground .
Hi Gergely,
Thanks for your patience.
I checked with the design team about your query. Here is the response from them.
Your understanding about min/max variation of Tpdi is correct. Datasheet mention that the variation is +/-1ns and it covers variation…
Hi John,
It should be -5dB to 31 dB as mentioned in the datasheet. Somehow the GUI shows -6 dB, I looked in the user guide in one of the images.
Most likely it is an error.
The datasheet plat also shows -5 to 31 dB variation as shown below, which is a…
Part Number: AFE5851 Other Parts Discussed in Thread: TX7316 , TX7332 Am developing handheld ultrasound, Now I want to know if AFE5851 and TX7316 can works together/ interfaced together and
ALSO I want know if there is any reference designs to refer a…
Part Number: AFE5851 Hi team
https://www.ti.com/lit/ug/slou258c/slou258c.pdf?ts=1592224178911&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FAFE5851
Figure 28 at page 40 of the user's guide.you showed a way for testing the TSW1250. Why did…
Part Number: AFE5851EVM Other Parts Discussed in Thread: AFE5851 Tool/software: Hello,
Our team recently purchased an AFE5851 evaluation board for testing, and I was looking through the datasheet and found that a deserializer like the ones listed in the…
Hi,
To answer your questions as following:
1) AFE5851 device is designed for the application of ultrasound which signal frequency is speced as >1MHz (this is shown on the datasheet),
for your application which input signal is 500kHz, then you recommend…
Part Number: AFE5851EVM Other Parts Discussed in Thread: AFE5851 Hello,
on the EVM user guide the pin 28 of AFE5851 is called FVDD and is connected to AVDD3V (3.3V LDO output). On the datasheet of the AFE5851 pin 28 is called DVDD18 (1.8V) and has the…
Part Number: AFE5851 Hi,
I have an image application that needs 32 analog inputs. I designed it with two AFE5851 chips. The analog input is driven by an amplifier output with 50 OHM serial resistor directly. The amplifier output is 1.1VDC plus 0 ~ 1V…
